HHLONIX
EN

Thailand · AIS Fibre

Can I use my own router with AIS Fibre?

Yes. Own router connects directly. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Wikideas1 · CC0 1.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

AIS Fibre FTTH — own router (VLAN 10 on ONU, or behind AIS router)

Own-router path
Own router connects directly
Physical handoff
ONU → Ethernet WAN (VLAN 10), or AIS router LAN1 → own router
WAN connection
Not published — ask the provider
VLAN
VLAN 10 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Option A (direct): connect the ONU LAN port to your router's WAN port and enable VLAN tagging with ID 10 on the WAN.
  2. Option B: connect LAN1 of the AIS router to your router's WAN port (no VLAN needed), or chain ONU → AIS router WAN → AIS router LAN1 → your router.
  3. On FTTB (building) service, connect AIS router LAN1 to your router's WAN; no VLAN 10 tag is needed.
  4. Login method/credentials for the direct option are not stated; ask AIS before switching (AIS also sells a BYOD package intended for own routers).
Own-router pathOwn router connects directly
WANNot published — ask the provider
PhoneCheck with your provider
TVCheck with your provider

What AIS Fibre officially documents

Option A (direct): connect the ONU LAN port to your router's WAN port and enable VLAN tagging with ID 10 on the WAN. Option B: connect LAN1 of the AIS router to your router's WAN port (no VLAN needed), or chain ONU → AIS router WAN → AIS router LAN1 → your router. On FTTB (building) service, connect AIS router LAN1 to your router's WAN; no VLAN 10 tag is needed. Login method/credentials for the direct option are not stated; ask AIS before switching (AIS also sells a BYOD package intended for own routers).

Before you remove the AIS Fibre box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. AIS Knowledge Center gives cabling options and the VLAN 10 requirement only; PPPoE/DHCP, credentials and MTU are not stated. Undated. AIS PLAYBOX/IPTV handling not stated.

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.