HHLONIX
EN

Portugal · DIGI Portugal

Can I use my own router with DIGI Portugal?

Yes. DIGI Portugal documents PPPoE with a line-dependent VLAN with your account's broadband login.

Networking installation tools
Illustrative photograph; equipment and compatibility may differ.www.heimnetzwerke.net · CC BY 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

DIGI Fibra — own router (PPPoE credentials on request)

Own-router path
Own router connects directly
Physical handoff
Fibre → own router (ONT details not stated)
WAN connection
PPPoE
VLAN
Confirm with provider
ISP phone / voice
No dependency documented
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Ask DIGI support (website chat or DIGI social media) for your PPPoE credentials.
  2. Set the router's WAN connection type to PPPoE and enter the supplied username and password.
  3. Confirm the VLAN ID with DIGI when requesting credentials — it is not published.
  4. Connect the router WAN to the DIGI fibre equipment (ONT).
WAN authPPPoE
VLANVaries — confirm for your line
Priority / PCP—
MTUDefault

What DIGI Portugal officially documents

Ask DIGI support (website chat or DIGI social media) for your PPPoE credentials. Set the router's WAN connection type to PPPoE and enter the supplied username and password. Confirm the VLAN ID with DIGI when requesting credentials — it is not published. Connect the router WAN to the DIGI fibre equipment (ONT).

Before you remove the DIGI Portugal box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Own router allowed at no extra cost. Not compatible with the DIGI landline service and not available on PRO-DIGI 10 Gbps. DIGI uses CG-NAT. VLAN, MTU, IPv6 and ONT details not stated.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. The VLAN depends on the access network behind your line — confirm it with the provider before configuring the router. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.