Finland · Elisa
Can I use my own router with Elisa?
Yes. Own router connects directly (medium-confidence evidence). Check phone and TV services before you remove the provider box.

Quick reference
Own-router settings at a glance
From official provider sources cited below. Pick your router for a full verdict with topology and caveats.
Elisa Valokuitu — own router behind the fibre terminal
- Own-router path
- Own router connects directly (medium-confidence evidence)
- Physical handoff
- Elisa fibre terminal (ONT) → Ethernet → router
- WAN connection
- Not published — ask the provider
- VLAN
- Confirm with provider
- ISP phone / voice
- Check with your provider
- ISP TV
- Check with your provider
- Evidence confidence
- Medium — verify account details
Settings to enter on your router
- Identify your fibre terminal model (DKT 79734, Inteno FG500, Inteno FG101 etc.).
- Connect your router's WAN port to the terminal's LAN port (DKT 79734 has one usable LAN port; on the Inteno FG500 use LAN 4, which is bridged).
- Set the router's WAN to obtain an address automatically (protocol not stated by Elisa — confirm with support).
- On an FG500 you can change NAT/bridge per port in its admin page at 192.168.10.1.
Instant verdict for your router:eero 6+Deco X50/X55ASUS RT-AX86U ProArcher BE550Orbi RBK760Nest Wifi ProOther router
Other Finnish ISPs:Compare all Finnish ISP settings
What Elisa officially documents
Identify your fibre terminal model (DKT 79734, Inteno FG500, Inteno FG101 etc.). Connect your router's WAN port to the terminal's LAN port (DKT 79734 has one usable LAN port; on the Inteno FG500 use LAN 4, which is bridged). Set the router's WAN to obtain an address automatically (protocol not stated by Elisa — confirm with support). On an FG500 you can change NAT/bridge per port in its admin page at 192.168.10.1.
Before you remove the Elisa box
The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Elisa's terminal page says models without Wi-Fi need a separate router and that the DKT 79734 can be connected directly to a router. No WAN protocol, VLAN, MTU, IPv6 or Elisa Viihde (TV) settings for third-party routers are stated.
Common setup mistakes
If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.
Next step
Evidence
Page reviewed 6 November 2026 · profile researched 6 November 2026.