HHLONIX
EN

Belgium · Proximus

Can I use my own router with Proximus?

Yes. Proximus documents DHCP / IPoE on VLAN 20. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Marcnovac · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 3How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Proximus Fiber/VDSL — own router behind ONT, VLAN 20 + DHCP

Own-router path
Own router connects directly
Physical handoff
Fibre ONT (or VDSL modem in bridge) → Ethernet WAN
WAN connection
DHCP
VLAN
VLAN 20 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. In MyProximus open your Internet product, choose 'Install your own equipment', and register your modem/router's serial number.
  2. Connect your router to the Proximus fibre ONT (or a Proximus modem bridging at layer 2 on VDSL).
  3. Tag WAN traffic with VLAN 20 — Proximus residential lines use this single VLAN for internet, TV and voice.
  4. Set IPv4 to DHCP and enable IPv6 with SLAAC plus DHCPv6 prefix delegation.
  5. For Proximus TV decoders, route the private ranges above, enable IGMP snooping/proxy, and give decoders stable DHCP leases.

Copy-paste router configuration

Generated from the settings above. Menu names vary by firmware version.

UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 20.
  3. IPv4 connection: DHCP.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 20, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: DHCP.
  4. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: Automatic IP.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 20, PRIO 0.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type Dynamic IP.
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 20.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: via DSL (VDSL).
  3. Account information required: No.
  4. Use VLAN for internet access: on, VLAN ID 20.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: leave on automatic/DHCP; VLAN ID 20.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: DHCP; VLAN 20 where your firmware offers it.
WAN authDHCP / IPoE
VLAN20 (802.1Q tagged)
Priority / PCPNot stated
MTUDefault

What Proximus officially documents

In MyProximus open your Internet product, choose 'Install your own equipment', and register your modem/router's serial number. Connect your router to the Proximus fibre ONT (or a Proximus modem bridging at layer 2 on VDSL). Tag WAN traffic with VLAN 20 — Proximus residential lines use this single VLAN for internet, TV and voice. Set IPv4 to DHCP and enable IPv6 with SLAAC plus DHCPv6 prefix delegation. For Proximus TV decoders, route the private ranges above, enable IGMP snooping/proxy, and give decoders stable DHCP leases.

Before you remove the Proximus box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Router guideline v1 (no date; cites BIPT decision of 26 Sep 2023). Voice uses SIP per 3GPP IMS; SIP server/registrar not stated. MTU and IPv6 prefix size not stated. Keep the Proximus modem for troubleshooting. Separate ONT and VDSL specs exist (not reviewed).

Common setup mistakes

Choose Dynamic IP / DHCP (IPoE), not PPPoE — there is no broadband login to enter. Tag the WAN with VLAN 20; a missing or wrong tag is the most common reason a new router gets no connection. IPv4 via DHCPv4; IPv6 via SLAAC + DHCPv6 prefix delegation. TV: decoders identified by DHCP option 60 starting 'IPTV'; private ranges 172.28.40.0/21 and 172.28.48.0/21; multicast 239.192.0.0/16 and 239.255.0.0/16; IGMPv3 snooping preferred. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.