HHLONIX
EN

Country · International

Can I use my own router in International?

0 of 1 International service profiles in the Hlonix dataset allow a third-party router to connect directly. The table compares WAN login, VLAN and handoff for Starlink.

An older Starlink router, not Router 3
Illustrative photograph; equipment and compatibility may differ.Tim Reckmann · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Side-by-side

International ISP router settings compared

WAN authentication, VLAN and handoff per service profile. Open an ISP for step-by-step settings, or test your exact router in the checker.

1 profiles
ISP / serviceHandoffWAN connectionVLANOwn-router pathPhone / voice
Starlink — Router 3 built-in Ethernet / Gen 2 adapterStarlink Router 3 Ethernet LAN (bypass mode), or Gen 2 router with Ethernet adapterHandled by the provider gatewayNone — untaggedGateway stays — use IP PassthroughNo dependency documented
Profiles1
Direct own-router0
Providers1
SourcesOfficial provider pages

How to read the comparison

"Direct" means your router can replace the provider router behind the fibre ONT or modem using the listed settings. Gateway, bridge and hub-required profiles keep a provider box in the path.

Phone and TV

Several providers tie phone or TV to their own device. Check the phone column before returning the provider equipment.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.