HHLONIX
EN

Sweden · Bahnhof

Can I use my own router with Bahnhof?

Yes. Bahnhof documents DHCP / IPoE with a line-dependent VLAN. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Amin · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 3How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Bahnhof fiber — own router behind converter, activate via DHCP portal

Own-router path
Own router connects directly (medium-confidence evidence)
Physical handoff
Fibre outlet / media converter → Ethernet WAN
WAN connection
DHCP
VLAN
Confirm with provider
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Connect your router (or a computer) with a network cable from the fibre outlet/converter to the WAN port.
  2. Leave the router's WAN on automatic (DHCP).
  3. Open dhcp.bahnhof.se in a browser to register and activate the connection.
  4. Allow up to about 20 minutes for the router to fetch its settings; if DHCP activation is not offered in your city network, contact Bahnhof.
WAN authDHCP / IPoE
VLANVaries — confirm for your line
Priority / PCP—
MTUDefault

What Bahnhof officially documents

Connect your router (or a computer) with a network cable from the fibre outlet/converter to the WAN port. Leave the router's WAN on automatic (DHCP). Open dhcp.bahnhof.se in a browser to register and activate the connection. Allow up to about 20 minutes for the router to fetch its settings; if DHCP activation is not offered in your city network, contact Bahnhof.

Before you remove the Bahnhof box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Bahnhof guides show connecting a router or computer directly and activating via its DHCP portal; DHCP activation depends on the city network. VLAN, MTU, IPv6, MAC registration: not stated.

Common setup mistakes

Choose Dynamic IP / DHCP (IPoE), not PPPoE — there is no broadband login to enter. The VLAN depends on the access network behind your line — confirm it with the provider before configuring the router. Activation through dhcp.bahnhof.se; Bahnhof notes this depends on the city network. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.