HHLONIX
EN

Spain · DIGI España

Can I use my own router with DIGI España?

Yes. DIGI España documents PPPoE with a line-dependent VLAN with your account's broadband login.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Ajay Suresh · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

DIGI Fibra — own router (PPPoE credentials on request)

Own-router path
Own router connects directly
Physical handoff
Fibre → own router (ONT details not stated)
WAN connection
PPPoE
VLAN
Confirm with provider
ISP phone / voice
No dependency documented
ISP TV
No dependency documented
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Call DIGI on 1200 (free from DIGI) or 919 120 120 and ask for your PPPoE credentials.
  2. Set the router's WAN connection type to PPPoE and enter those credentials.
  3. Confirm the VLAN ID with DIGI — it is not published on the FAQ.
  4. If you have the ZTE 6705 and want to keep the landline, put it in bridge mode using DIGI's guide instead of replacing it.
WAN authPPPoE
VLANVaries — confirm for your line
Priority / PCP—
MTUDefault

What DIGI España officially documents

Call DIGI on 1200 (free from DIGI) or 919 120 120 and ask for your PPPoE credentials. Set the router's WAN connection type to PPPoE and enter those credentials. Confirm the VLAN ID with DIGI — it is not published on the FAQ. If you have the ZTE 6705 and want to keep the landline, put it in bridge mode using DIGI's guide instead of replacing it.

Before you remove the DIGI España box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. No TV dependency is documented. Own router allowed at no extra cost. Not compatible with DIGI fixed telephony, except with the ZTE 6705 in bridge mode. VLAN, MTU, ONT and 10 Gbps conditions not stated on the FAQ.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. The VLAN depends on the access network behind your line — confirm it with the provider before configuring the router. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.