HHLONIX
EN

Czechia · O2 Czech

Can I use my own router with O2 Czech?

Yes. O2 Czech documents PPPoE on VLAN 848 and generic login values. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Swpb · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

O2 Internet Optický (FTTH, CETIN) — own router, PPPoE VLAN 848

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN (own ONT allowed on Optický plans after registration)
WAN connection
PPPoE
VLAN
VLAN 848 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Plug the router's WAN port into the fibre ONT.
  2. Set the WAN connection type to PPPoE.
  3. Enable VLAN tagging on the WAN interface and set VLAN ID 848.
  4. Enter username O2 and password O2 (capital O, digit 2).
  5. Using your own ONT instead of O2's: send O2 the ONT type, serial number and your order number via its form and wait (up to 14 days) for confirmation before connecting.

Copy-paste router configuration

Generated from the settings above. Generic values published by the provider — any non-empty value is accepted where the provider says so. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan.848'
uci set network.wan.proto='pppoe'
uci set network.wan.username='O2'
uci set network.wan.password='O2'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface vlan add name=wan-vlan848 vlan-id=848 interface=ether1
/interface pppoe-client add name=pppoe-out1 interface=wan-vlan848 user="O2" password="O2" add-default-route=yes use-peer-dns=yes disabled=no
/interface list member add list=WAN interface=pppoe-out1
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 848.
  3. IPv4 connection: PPPoE — username O2, password O2.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 848, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: PPPoE, username O2, password O2.
  4. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username O2 and password O2.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 848, PRIO 0.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username O2, password O2).
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 848.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: Yes — username O2, password O2.
  4. Use VLAN for internet access: on, VLAN ID 848.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username O2, password O2); VLAN ID 848.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE; VLAN 848 where your firmware offers it.

O2 VDSL / VDSL bonding — own modem, PPPoE VLAN 848

Own-router path
Your own compatible modem + router
Physical handoff
VDSL2 line → own VDSL modem-router
WAN connection
PPPoE
VLAN
VLAN 848 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Use a modem-router with a VDSL2 port and connect it to the phone socket.
  2. Create a PPPoE WAN connection (LLC / LLC SNAP encapsulation).
  3. Enable VLAN on the WAN and enter VLAN ID 848.
  4. Enter username O2 and password O2 (capital O, digit 2).
WAN authPPPoE
VLAN848 (802.1Q tagged)
Priority / PCPNot stated
MTUDefault

What O2 Czech officially documents

Plug the router's WAN port into the fibre ONT. Set the WAN connection type to PPPoE. Enable VLAN tagging on the WAN interface and set VLAN ID 848. Enter username O2 and password O2 (capital O, digit 2). Using your own ONT instead of O2's: send O2 the ONT type, serial number and your order number via its form and wait (up to 14 days) for confirmation before connecting. Use a modem-router with a VDSL2 port and connect it to the phone socket. Create a PPPoE WAN connection (LLC / LLC SNAP encapsulation). Enable VLAN on the WAN and enter VLAN ID 848. Enter username O2 and password O2 (capital O, digit 2).

Before you remove the O2 Czech box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. O2 gives no support for third-party devices. The access network is run by CETIN. MTU, IPv6, IPTV and VoIP parameters not stated. On NEJ Optical Plus and DOCSIS lines O2 says the router just takes a dynamic IP automatically from the upstream device (no PPPoE/VLAN). Check your access technology in Moje O2 (Základní přípojka).

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. Tag the WAN with VLAN 848; a missing or wrong tag is the most common reason a new router gets no connection. Username/password are capital letter O followed by digit 2 Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.