HHLONIX
EN

Ireland · Sky

Can I use my own router with Sky Ireland Full Fibre?

Yes on compatible hardware, according to current Sky-hosted community guidance. The Republic of Ireland profile differs from the UK: the cited setup uses PPPoE plus VLAN 10 rather than the UK's Option 61 path.

Network equipment and server rack
Illustrative photograph; equipment and compatibility may differ.Shixart1985 · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Dataset snapshot 23 September 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Sky Ireland Full Fibre — third-party router

Own-router path
Own router connects directly (medium-confidence evidence)
Physical handoff
Full Fibre / ONT → Ethernet WAN
WAN connection
PPPoE
VLAN
VLAN 10 (802.1Q tagged)
ISP phone / voice
Provider hub required
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Sky-hosted community guidance for Republic of Ireland documents PPPoE rather than the UK Option 61 path.
  2. Use VLAN ID 10.
  3. Community guidance uses generic non-empty Sky PPPoE credentials; reconnect the Sky hub if support requires provider diagnostics.

Copy-paste router configuration

Generated from the settings above. Use the broadband username and password from your provider account or welcome email. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan.10'
uci set network.wan.proto='pppoe'
uci set network.wan.username='YOUR_BROADBAND_USERNAME'
uci set network.wan.password='YOUR_BROADBAND_PASSWORD'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface vlan add name=wan-vlan10 vlan-id=10 interface=ether1
/interface pppoe-client add name=pppoe-out1 interface=wan-vlan10 user="YOUR_BROADBAND_USERNAME" password="YOUR_BROADBAND_PASSWORD" add-default-route=yes use-peer-dns=yes disabled=no
/interface list member add list=WAN interface=pppoe-out1
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 10.
  3. IPv4 connection: PPPoE — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 10, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: PPPoE, username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username YOUR_BROADBAND_USERNAME and password YOUR_BROADBAND_PASSWORD.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 10, PRIO 0.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 10.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: Yes — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Use VLAN for internet access: on, VLAN ID 10.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD); VLAN ID 10.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE; VLAN 10 where your firmware offers it.
WAN authPPPoE
VLAN10
UK Option 61Not the cited Ireland path
EvidenceSky-hosted community / medium confidence

Ireland and UK Sky should not share one rule

Sky community experts repeatedly distinguish Republic of Ireland connections from UK connections. Copying UK Option 61 instructions to an Irish FTTP line can send the user in the wrong direction.

Credentials in community guidance are generic

The cited Sky Ireland threads use a generic non-empty PPPoE username/password plus VLAN 10. Because this is provider-hosted community guidance rather than a formal support article, Hlonix keeps the confidence at medium.

Voice still keeps the Sky hub relevant

Sky's community guidance says provider digital voice can depend on the Sky hub, and support may ask for the hub to be reconnected for diagnostics.

Next step

Evidence

Page reviewed 6 November 2026 · compatibility dataset snapshot 23 September 2026.