HHLONIX
EN

Norway · Telia

Can I use my own router with Telia?

Partly. Gateway stays — use bridge/modem mode. Check phone and TV services before you remove the provider box.

Broadband router hardware
Illustrative photograph; equipment and compatibility may differ.Project Kei · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Telia Norge — Zyxel EX5501 bridge mode on the 2.5G LAN port

Own-router path
Gateway stays — use bridge/modem mode
Physical handoff
Telia router (bridged 2.5G LAN port) → own router
WAN connection
Handled by the provider gateway
VLAN
Handled by provider device
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Log in to Min side and open Utstyr.
  2. Open the menu next to Hjemmesentral and choose Andre innstillinger.
  3. Turn on Bro-modus (bridge mode).
  4. Connect your own router's WAN port to the 2.5G LAN port on the Zyxel EX5501.
Own-router pathGateway stays — use bridge/modem mode
WANHandled by the provider gateway
PhoneCheck with your provider
TVCheck with your provider

What Telia officially documents

Log in to Min side and open Utstyr. Open the menu next to Hjemmesentral and choose Andre innstillinger. Turn on Bro-modus (bridge mode). Connect your own router's WAN port to the 2.5G LAN port on the Zyxel EX5501.

Before you remove the Telia box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Page covers the Zyxel EX5501 only. Bridge mode is not available on Trådløst bredbånd. WAN protocol, VLAN, IPv6, TV implications: not stated.

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.