HHLONIX
EN

Country · Hong Kong

Can I use my own router in Hong Kong?

2 of 2 Hong Kong service profiles in the Hlonix dataset allow a third-party router to connect directly. The table compares WAN login, VLAN and handoff for HKBN, Netvigator (HKT).

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Marcnovac · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Side-by-side

Hong Kong ISP router settings compared

WAN authentication, VLAN and handoff per service profile. Open an ISP for step-by-step settings, or test your exact router in the checker.

2 profiles
ISP / serviceHandoffWAN connectionVLANOwn-router pathPhone / voice
HKBN fibre broadband — own router on DHCPWall plate / ONT → Ethernet WANDHCPNone — untaggedOwn router connects directlyCheck with your provider
Netvigator broadband — PPPoE loginProvider modem/ONT → Ethernet WANPPPoEConfirm with providerOwn router connects directly (medium-confidence evidence)Check with your provider
Profiles2
Direct own-router2
Providers2
SourcesOfficial provider pages

How to read the comparison

"Direct" means your router can replace the provider router behind the fibre ONT or modem using the listed settings. Gateway, bridge and hub-required profiles keep a provider box in the path.

Phone and TV

Several providers tie phone or TV to their own device. Check the phone column before returning the provider equipment.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.