HHLONIX
EN

South Africa · Cool Ideas

Can I use my own router with Cool Ideas?

Yes. Cool Ideas documents PPPoE with a line-dependent VLAN with your account's broadband login. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Ajay Suresh · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Cool Ideas Fibre — PPPoE on own router

Own-router path
Own router connects directly
Physical handoff
FNO ONT → Ethernet WAN
WAN connection
PPPoE
VLAN
Confirm with provider
ISP phone / voice
Check with your provider
ISP TV
No dependency documented
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Request your PPPoE username and password by emailing Cool Ideas support from the account holder's email address.
  2. Connect the router's WAN port to the ONT.
  3. In the router's Internet settings, change the connection type from Dynamic IP to PPPoE (check the router is in router mode if the PPPoE fields are missing).
  4. Enter the username (format like name.surname@coolideas.co) and password, save and click Connect if no IP appears.
WAN authPPPoE
VLANVaries — confirm for your line
Priority / PCP—
MTUDefault

What Cool Ideas officially documents

Request your PPPoE username and password by emailing Cool Ideas support from the account holder's email address. Connect the router's WAN port to the ONT. In the router's Internet settings, change the connection type from Dynamic IP to PPPoE (check the router is in router mode if the PPPoE fields are missing). Enter the username (format like name.surname@coolideas.co) and password, save and click Connect if no IP appears.

Before you remove the Cool Ideas box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. No TV dependency is documented. Cool Ideas' guides are router-specific 'Dynamic to PPPoE' articles; they do not say which FNOs need PPPoE versus dynamic IP. VLAN, MTU, IPv6: not stated.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. The VLAN depends on the access network behind your line — confirm it with the provider before configuring the router. Username template shown in the guide: name.surname@coolideas.co Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.