HHLONIX
EN

Switzerland · Swisscom

Can I use my own router with Swisscom Fibre?

Yes, with an approved compatible router. Swisscom documents DHCP, VLAN 10 and DHCP Option 60 value 100008,0001, followed by a registration step. That special DHCP option is why Hlonix does not call ordinary DHCP/VLAN support sufficient.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Santeri Viinamäki · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Dataset snapshot 23 September 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Swisscom Fibre via ONT — external router

Own-router path
Direct, if the router supports DHCP Option 60
Physical handoff
Swisscom fibre ONT → Ethernet WAN
WAN connection
DHCP
VLAN
VLAN 10 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Use DHCP on the WAN interface.
  2. Set VLAN ID 10.
  3. Set DHCP Option 60 to 100008,0001.
  4. Complete Swisscom router registration after the first successful connection.

Copy-paste router configuration

Generated from the settings above. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan.10'
uci set network.wan.proto='dhcp'
uci set network.wan.vendorid='100008,0001'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface vlan add name=wan-vlan10 vlan-id=10 interface=ether1
/ip dhcp-client option add name=opt60 code=60 value="'100008,0001'"
/ip dhcp-client add interface=wan-vlan10 dhcp-options=opt60,hostname,clientid disabled=no
/interface list member add list=WAN interface=wan-vlan10
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 10.
  3. IPv4 connection: DHCP.
  4. DHCP client options: add option 60 with value 100008,0001.
  5. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 10, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: DHCP.
  4. WAN → Advanced DHCP: add 'send dhcp-class-identifier "100008,0001";' (option modifiers).
  5. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: Automatic IP.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 10, PRIO 0.
  3. WAN → Special requirement: Class-identifier (option 60) = 100008,0001.
  4. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type Dynamic IP.
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 10.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: No.
  4. Use VLAN for internet access: on, VLAN ID 10.
  5. FRITZ!OS does not expose DHCP option 60 on every model — check your model before relying on it.
  6. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: leave on automatic/DHCP; VLAN ID 10.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: DHCP; VLAN 10 where your firmware offers it.
  3. eero and Nest do not document priority tags or option 60 — they are not a reliable fit for this profile.
WAN modeDHCP
VLAN10
DHCP Option 60100008,0001
RegistrationRequired

Option 60 is a real compatibility gate

A router can support VLANs and still fail if its firmware cannot send the required vendor-class value. Hlonix therefore exposes Option 60 separately for custom routers.

XGS-PON hardware is restricted

Swisscom says only certified routers/modules may connect directly to its 10G XGS-PON technology. Using the provider ONT avoids pretending any optical module will work.

TV and telephony need extra features

Swisscom documents IGMP multicast requirements for blue TV and separate SIP credentials for eligible telephony products.

Next step

Evidence

Page reviewed 6 November 2026 · compatibility dataset snapshot 23 September 2026.