HHLONIX
EN

Japan · au Hikari (KDDI)

Can I use my own router with au Hikari (KDDI)?

Only behind the provider device. Provider hub/router must stay.

Mesh Wi-Fi router
Illustrative photograph; equipment and compatibility may differ.Haydn Blackey · CC BY-SA 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

au Hikari — own router behind the home gateway

Own-router path
Provider hub/router must stay
Physical handoff
ONU → au home gateway (HGW) → own router
WAN connection
Handled by the provider hub
VLAN
Handled by provider device
ISP phone / voice
Keeps working on the provider hub
ISP TV
Keeps working on the provider hub
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Keep the au home gateway (HGW) connected; it handles the internet connection.
  2. Connect a LAN port on the HGW to your router's WAN port with an Ethernet cable.
  3. Put your router in bridge/AP mode (au sets its own external Wi-Fi unit to BR mode in the same setup) to avoid double routing.
  4. Pick a router whose Wi-Fi standard matches what your HGW supports (au links a spec list).
Own-router pathProvider hub/router must stay
WANHandled by the provider hub
PhoneKeeps working on the provider hub
TVKeeps working on the provider hub

What au Hikari (KDDI) officially documents

Keep the au home gateway (HGW) connected; it handles the internet connection. Connect a LAN port on the HGW to your router's WAN port with an Ethernet cable. Put your router in bridge/AP mode (au sets its own external Wi-Fi unit to BR mode in the same setup) to avoid double routing. Pick a router whose Wi-Fi standard matches what your HGW supports (au links a spec list).

Before you remove the au Hikari (KDDI) box

Phone service keeps working on the provider device. TV services may use their own VLAN or box; check before swapping. au says you can use your own commercially sold Wi-Fi router alongside the HGW (FAQ updated 2026-06-16). It does not say the HGW can be removed or give PPPoE details; bridge mode is inferred from au's own BR-mode setup for its external unit (2025-12-05).

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.