HHLONIX
EN

Japan · So-net

Can I use my own router with So-net?

Yes. So-net documents DHCP / IPoE with no VLAN tag.

Networking installation tools
Illustrative photograph; equipment and compatibility may differ.www.heimnetzwerke.net · CC BY 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

So-net Hikari — IPoE (IPv6) option with own router

Own-router path
Own router connects directly (medium-confidence evidence)
Physical handoff
ONU / Hikari Denwa HGW → Ethernet WAN
WAN connection
DHCP
VLAN
None — untagged
ISP phone / voice
Keeps working on the provider hub
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Apply for the So-net IPoE (IPv6) option (formerly v6plus); expect 1-2 hours without internet during the switch.
  2. Plug your router into the ONU or NTT Hikari Denwa router.
  3. On your router enable IPv6 passthrough (some makers call it IPv6 bridge) and ND proxy if available.
  4. If you use the NTT Hikari Denwa router, check that its connection ID/password are set (not needed on 10G/S/M/L plans) and IPv6 is enabled.
  5. Check your PC has IPv6 enabled.

Copy-paste router configuration

Generated from the settings above. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan'
uci set network.wan.proto='dhcp'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/ip dhcp-client add interface=ether1 disabled=no
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: off.
  3. IPv4 connection: DHCP.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Use the physical WAN NIC as WAN.
  2. WAN → IPv4 configuration type: DHCP.
  3. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: Automatic IP.
  2. LAN → IPTV: leave ISP Profile on None.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type Dynamic IP.
  2. IPTV/VLAN: leave disabled.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: No.
  4. Use VLAN for internet access: off.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: leave on automatic/DHCP.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: DHCP.
WAN authDHCP / IPoE
VLANNone — untagged
Priority / PCP—
MTUDefault

What So-net officially documents

Apply for the So-net IPoE (IPv6) option (formerly v6plus); expect 1-2 hours without internet during the switch. Plug your router into the ONU or NTT Hikari Denwa router. On your router enable IPv6 passthrough (some makers call it IPv6 bridge) and ND proxy if available. If you use the NTT Hikari Denwa router, check that its connection ID/password are set (not needed on 10G/S/M/L plans) and IPv6 is enabled. Check your PC has IPv6 enabled.

Before you remove the So-net box

Phone service keeps working on the provider device. TV services may use their own VLAN or box; check before swapping. Page (c) 2026 does not name the IPv4-over-IPv6 method for third-party routers; it only gives IPv6 passthrough/ND proxy guidance and says to ask the router maker if unsure. Apple AirMac may not work.

Common setup mistakes

Choose Dynamic IP / DHCP (IPoE), not PPPoE — there is no broadband login to enter. Leave WAN VLAN tagging off; adding a tag here breaks the connection. Enable IPv6 passthrough (IPv6 bridge) and ND proxy on own router Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.