HHLONIX
EN

Japan · BIGLOBE

Can I use my own router with BIGLOBE?

Yes. BIGLOBE documents PPPoE with no VLAN tag with your account's broadband login. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Amin · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

BIGLOBE Hikari — IPv4 PPPoE

Own-router path
Own router connects directly
Physical handoff
ONU / VDSL modem → Ethernet WAN
WAN connection
PPPoE
VLAN
None — untagged
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Connect the ONU (or VDSL modem) to your Wi-Fi router's WAN port.
  2. Choose PPPoE as the connection type.
  3. Enter your BIGLOBE user ID followed by @biglobe.ne.jp as the username (half-width, case-sensitive).
  4. Enter your connection password from the membership card or connection ID notice.

Copy-paste router configuration

Generated from the settings above. Use the broadband username and password from your provider account or welcome email. Menu names vary by firmware version.

UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: off.
  3. IPv4 connection: PPPoE — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Use the physical WAN NIC as WAN.
  2. WAN → IPv4 configuration type: PPPoE, username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  3. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username YOUR_BROADBAND_USERNAME and password YOUR_BROADBAND_PASSWORD.
  2. LAN → IPTV: leave ISP Profile on None.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
  2. IPTV/VLAN: leave disabled.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: via DSL (VDSL).
  3. Account information required: Yes — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Use VLAN for internet access: off.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE.

BIGLOBE Hikari — IPv6 option (own router behind phone gateway only)

Own-router path
Provider hub/router must stay
Physical handoff
Hikari Denwa device → own router in AP/bridge mode
WAN connection
Handled by the provider hub
VLAN
Handled by provider device
ISP phone / voice
Keeps working on the provider hub
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. With a Hikari Denwa / phone contract: connect the phone-compatible device's LAN port to your router.
  2. Switch your router to AP (access point) or BR (bridge) mode; router mode may block access.
  3. Delete any PPPoE settings on your router and PCs, otherwise the IPv6 option's fast path is not used.
  4. Without a phone contract: use BIGLOBE's rented IPv6-option wireless device connected to the ONU instead of your own router.
WAN authPPPoE
VLANNone — untagged
Priority / PCP—
MTUDefault

What BIGLOBE officially documents

Connect the ONU (or VDSL modem) to your Wi-Fi router's WAN port. Choose PPPoE as the connection type. Enter your BIGLOBE user ID followed by @biglobe.ne.jp as the username (half-width, case-sensitive). Enter your connection password from the membership card or connection ID notice. With a Hikari Denwa / phone contract: connect the phone-compatible device's LAN port to your router. Switch your router to AP (access point) or BR (bridge) mode; router mode may block access. Delete any PPPoE settings on your router and PCs, otherwise the IPv6 option's fast path is not used. Without a phone contract: use BIGLOBE's rented IPv6-option wireless device connected to the ONU instead of your own router.

Before you remove the BIGLOBE box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Not used with the IPv6 option, and not applicable to BIGLOBE Hikari 10Gbps, FLET'S Cross or docomo Hikari 10G. MTU not stated. If you have an optical phone contract, PPPoE is set on the phone device instead. Undated.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. Leave WAN VLAN tagging off; adding a tag here breaks the connection. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.