HHLONIX
EN

Singapore · M1

Can I use my own router with M1?

Yes. Own router connects directly.

Mesh Wi-Fi router
Illustrative photograph; equipment and compatibility may differ.homethods.com · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

M1 Fibre Broadband — own router to ONT

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN
WAN connection
Not published — ask the provider
VLAN
Confirm with provider
ISP phone / voice
Keeps working on the provider hub
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Connect your own router's WAN port to the ONT LAN port with an Ethernet cable.
  2. On 10Gbps/XGSPON plans, use a router with a 10GbE WAN port; on the 2.5Gbps plan, use the ONT port that supports 2.5Gbps.
  3. Leave the router's WAN connection type at its automatic default unless M1 tells you otherwise (the official FAQ does not state a WAN type).
  4. If M1 Fixed Voice is subscribed, keep the phone plugged into the ONT's phone port, not your router.
Own-router pathOwn router connects directly
WANNot published — ask the provider
PhoneKeeps working on the provider hub
TVCheck with your provider

What M1 officially documents

Connect your own router's WAN port to the ONT LAN port with an Ethernet cable. On 10Gbps/XGSPON plans, use a router with a 10GbE WAN port; on the 2.5Gbps plan, use the ONT port that supports 2.5Gbps. Leave the router's WAN connection type at its automatic default unless M1 tells you otherwise (the official FAQ does not state a WAN type). If M1 Fixed Voice is subscribed, keep the phone plugged into the ONT's phone port, not your router.

Before you remove the M1 box

Phone service keeps working on the provider device. TV services may use their own VLAN or box; check before swapping. Official FAQ confirms you can connect your current wireless router to the ONT. WAN protocol (DHCP/PPPoE), VLAN, MTU, IPv6: not stated. Fixed voice connects to the ONT via RJ-11. 'voice: preserved-on-hub' here means the ONT, not a router.

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.