HHLONIX
EN

Singapore · MyRepublic

Can I use my own router with MyRepublic Singapore?

Yes on compatible plans. MyRepublic currently advertises no-router choices and explains the standard ONT + separate-router topology, making customer-owned routing hardware a normal use case.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Santeri Viinamäki · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Dataset snapshot 23 September 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

MyRepublic Singapore Fibre — own router

Own-router path
Own router connects directly (medium-confidence evidence)
Physical handoff
MyRepublic ONT → Ethernet WAN router
WAN connection
DHCP
VLAN
None — untagged
ISP phone / voice
Check with your provider
ISP TV
No dependency documented
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. MyRepublic currently offers no-router options on broadband plans, supporting use of existing routing hardware.
  2. Its ONT guidance describes the ONT as the fibre termination device with a separate router behind it.
  3. For 10Gbps plans, choose hardware with WAN/LAN ports capable of the desired throughput.

Copy-paste router configuration

Generated from the settings above. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan'
uci set network.wan.proto='dhcp'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/ip dhcp-client add interface=ether1 disabled=no
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: off.
  3. IPv4 connection: DHCP.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Use the physical WAN NIC as WAN.
  2. WAN → IPv4 configuration type: DHCP.
  3. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: Automatic IP.
  2. LAN → IPTV: leave ISP Profile on None.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type Dynamic IP.
  2. IPTV/VLAN: leave disabled.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: No.
  4. Use VLAN for internet access: off.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: leave on automatic/DHCP.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: DHCP.
No-router plansAvailable
Fibre terminationONT
Own routerEthernet behind ONT
10Gbps plansWAN/LAN speed matters

The ONT is not the Wi-Fi router

MyRepublic's fibre explainer separates the ONT from the router role. That makes swapping the router straightforward when the plan exposes the normal ONT handoff.

High-speed plans expose hardware bottlenecks

A router can connect successfully but still cap throughput if its WAN or LAN port is only 1G/2.5G on a multi-gig plan.

Plan-specific bundles still matter

Some high-speed promotions bundle or require approved equipment, so Hlonix keeps this profile at medium confidence and asks users to verify the exact plan.

Next step

Evidence

Page reviewed 6 November 2026 · compatibility dataset snapshot 23 September 2026.