Netherlands · Odido
Can I use my own router with Odido?
Yes. Odido documents DHCP / IPoE on VLAN 300. Check phone and TV services before you remove the provider box.

Quick reference
Own-router settings at a glance
From official provider sources cited below. Pick your router for a full verdict with topology and caveats.
Odido Glasvezel — own modem, DHCP on VLAN 300
- Own-router path
- Own router connects directly
- Physical handoff
- Fibre NT/media converter → Ethernet WAN (or SFP)
- WAN connection
- DHCP
- VLAN
- VLAN 300 (802.1Q tagged)
- ISP phone / voice
- Check with your provider
- ISP TV
- Check with your provider
- Evidence confidence
- Medium — verify account details
Settings to enter on your router
- First activate your line with the Odido modem and check it works, then swap in your own router.
- Connect your router's WAN port (or SFP) to the fibre NT.
- Set WAN to IPoE / DHCP client with 802.1Q VLAN ID 300 and 802.1p priority 0. No username or password is needed.
- Set MTU to 1500 and use routing mode with NAT, IPv4 only.
- For Vast Bellen, configure SIP using the Odido telephony PDF and the account details in Mijn Odido. For TV, follow Odido's separate own-modem TV PDF.
Copy-paste router configuration
Generated from the settings above. Menu names vary by firmware version.
OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan.300'
uci set network.wan.proto='dhcp'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restartMikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface vlan add name=wan-vlan300 vlan-id=300 interface=ether1
/ip dhcp-client add interface=wan-vlan300 disabled=no
/interface list member add list=WAN interface=wan-vlan300UniFi
- Settings → Internet → select the WAN (Primary) → Advanced: Manual.
- VLAN ID: on, 300.
- IPv4 connection: DHCP.
- Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
- Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 300, priority 0.
- Interfaces → Assignments: assign the new VLAN as WAN.
- WAN → IPv4 configuration type: DHCP.
- Save, apply, then power-cycle the ONT/modem.
ASUS
- WAN → Internet Connection → WAN Connection Type: Automatic IP.
- LAN → IPTV → Select ISP Profile: Manual → Internet: VID 300, PRIO 0.
- Apply and reboot the ONT/modem.
TP-Link
- Advanced → Network → Internet: connection type Dynamic IP.
- Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 300.
- Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
- Save and restart the ONT/modem.
FRITZ!Box
- Internet → Account Information → Internet service provider: Other Internet service provider.
- Connection: external modem or router (LAN 1 as WAN).
- Account information required: No.
- Use VLAN for internet access: on, VLAN ID 300.
- Apply and restart the ONT/modem.
eero / Nest
- eero app → Settings → Network settings → ISP settings: leave on automatic/DHCP; VLAN ID 300.
- Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: DHCP; VLAN 300 where your firmware offers it.
Instant verdict for your router:eero 6+Deco X50/X55ASUS RT-AX86U ProArcher BE550Orbi RBK760Nest Wifi ProOther router
Other Dutch ISPs:KPNZiggoBudget ThuisCompare all Dutch ISP settings
What Odido officially documents
First activate your line with the Odido modem and check it works, then swap in your own router. Connect your router's WAN port (or SFP) to the fibre NT. Set WAN to IPoE / DHCP client with 802.1Q VLAN ID 300 and 802.1p priority 0. No username or password is needed. Set MTU to 1500 and use routing mode with NAT, IPv4 only. For Vast Bellen, configure SIP using the Odido telephony PDF and the account details in Mijn Odido. For TV, follow Odido's separate own-modem TV PDF.
Before you remove the Odido box
The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Odido's settings PDF lists the same VLAN 300 / DHCP / MTU 1500 values for VDSL. ADSL is untagged DHCP on VPI/VCI 0/37. Odido says IPv6 is not yet supported on its network. Support is only given with Odido equipment connected, and Odido may block a connection that disrupts its network. Keep the Odido modem: you must return it when you cancel. Wifi Plus is not supported with your own modem. No page date is shown.
Common setup mistakes
Choose Dynamic IP / DHCP (IPoE), not PPPoE — there is no broadband login to enter. Tag the WAN with VLAN 300; a missing or wrong tag is the most common reason a new router gets no connection. IPv4 only (IPoE, routing mode with NAT); IPv6 not yet offered. Power-cycle the ONT or modem after swapping routers so it releases the old session.
Next step
Evidence
- Odido Service — Eigen modem gebruiken (official) (official ISP)
- Odido — Modeminstellingen voor gebruik eigen modem (official PDF linked from Odido service page) (official ISP)
Page reviewed 6 November 2026 · profile researched 6 November 2026.