HHLONIX
EN

Netherlands · Ziggo

Can I use my own router with Ziggo?

Yes. Ziggo explains that its supplied box combines a modem and Wi-Fi router. If you only want your own router, put the Ziggo modem in bridge mode so it passes the connection to your router.

Cable modem equipment
Illustrative photograph; equipment and compatibility may differ.Pancho507 · CC BY 4.0 · Wikimedia Commons
Page reviewed 28 September 2026Dataset snapshot 23 September 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Ziggo — Ziggo modem in bridge mode + own router

Own-router path
Gateway stays — use bridge/modem mode
Physical handoff
Ziggo coax modem/gateway retained
WAN connection
Handled by the provider gateway
VLAN
Handled by provider device
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Use the Ziggo modem in bridge mode when you want your own router to handle the home network.
  2. Keep the Ziggo modem available for support.
  3. Make sure the own router has a suitable firewall, including for IPv6.
Cable modemStays for bridge-mode setup
Own routerSupported behind bridge mode
IPv6Supported in bridge mode
Provider supportKeep Ziggo modem available

Router replacement is not cable-modem replacement

In bridge mode the Ziggo device still terminates the coax network. Your router handles the home network behind it.

Ziggo also supports own modems

Ziggo's current page describes a provider process for a compatible own modem, but that is a separate hardware/activation problem from simply adding an own router.

IPv6 firewall matters

Ziggo explicitly warns users to ensure the own router has a firewall that blocks unwanted inbound IPv6 connections.

Next step

Evidence

Page reviewed 28 September 2026 · compatibility dataset snapshot 23 September 2026.