HHLONIX
EN

Italy · Fastweb

Can I use my own router with Fastweb?

Yes. Fastweb documents DHCP / IPoE with a line-dependent VLAN with your account's broadband login. Check phone and TV services before you remove the provider box.

Network equipment and server rack
Illustrative photograph; equipment and compatibility may differ.Shixart1985 · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Fastweb Fibra FTTH — own router via ONT

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN
WAN connection
DHCP
VLAN
Confirm with provider
ISP phone / voice
Check with your provider
ISP TV
No dependency documented
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Connect the router's Gigabit WAN port to the Fastweb ONT with Cat 5e or better.
  2. Set WAN to DHCP client (dynamic IP), routed mode with NAT.
  3. Leave the WAN untagged on Fastweb's own GPON network; on Open Fiber or TIM-ONT lines tag VLAN 835 with priority 0.
  4. Request any credentials and VoIP IP details from Fastweb customer service (146) or MyFastweb.
  5. Some certified FRITZ!Box models (5690 Pro/5690/5590 Fiber International) can plug straight into the fibre outlet without the ONT.
WAN authDHCP / IPoE
VLANVaries — confirm for your line
Priority / PCP—
MTUDefault

What Fastweb officially documents

Connect the router's Gigabit WAN port to the Fastweb ONT with Cat 5e or better. Set WAN to DHCP client (dynamic IP), routed mode with NAT. Leave the WAN untagged on Fastweb's own GPON network; on Open Fiber or TIM-ONT lines tag VLAN 835 with priority 0. Request any credentials and VoIP IP details from Fastweb customer service (146) or MyFastweb. Some certified FRITZ!Box models (5690 Pro/5690/5590 Fiber International) can plug straight into the fibre outlet without the ONT.

Before you remove the Fastweb box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. No TV dependency is documented. Page is under Fastweb's business section. MTU not stated. 10 Gbit/s option currently requires the Fastweb XGS modem. VoIP proxy voip.fastwebnet.it (UDP 5060). Page says credentials come from customer service but does not explain what they are used for on DHCP lines.

Common setup mistakes

Choose Dynamic IP / DHCP (IPoE), not PPPoE — there is no broadband login to enter. The VLAN depends on the access network behind your line — confirm it with the provider before configuring the router. VLAN depends on the network: Fastweb's own GPON = untagged; Open Fiber (BS-GPON) or TIM (VULA) ONT = VLAN 835. Data CoS 0; voice CoS 1 (Open Fiber) or 2 (TIM). Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.