HHLONIX
EN

Italy · Vodafone Italia

Can I use my own router with Vodafone Italia?

Yes. Vodafone Italia documents PPPoE on VLAN 1036 and generic login values. Check phone and TV services before you remove the provider box.

Networking installation tools
Illustrative photograph; equipment and compatibility may differ.www.heimnetzwerke.net · CC BY 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Vodafone Italia Fibra FTTH — own router via Vodafone ONT

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN
WAN connection
PPPoE
VLAN
VLAN 1036 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
No dependency documented
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Connect the router's Gigabit WAN port to the Vodafone ONT with a Cat 5e or better cable.
  2. Choose PPPoE as the WAN connection type with NAT enabled.
  3. Tag the WAN with 802.1Q VLAN ID 1036.
  4. Use vodafoneadsl as both PPPoE username and password.
  5. For FTTC (VDSL2) use the same credentials and VLAN 1036 with PTM encapsulation.

Copy-paste router configuration

Generated from the settings above. Generic values published by the provider — any non-empty value is accepted where the provider says so. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan.1036'
uci set network.wan.proto='pppoe'
uci set network.wan.username='vodafoneadsl'
uci set network.wan.password='vodafoneadsl'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface vlan add name=wan-vlan1036 vlan-id=1036 interface=ether1
/interface pppoe-client add name=pppoe-out1 interface=wan-vlan1036 user="vodafoneadsl" password="vodafoneadsl" add-default-route=yes use-peer-dns=yes disabled=no
/interface list member add list=WAN interface=pppoe-out1
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 1036.
  3. IPv4 connection: PPPoE — username vodafoneadsl, password vodafoneadsl.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 1036, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: PPPoE, username vodafoneadsl, password vodafoneadsl.
  4. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username vodafoneadsl and password vodafoneadsl.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 1036, PRIO 0.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username vodafoneadsl, password vodafoneadsl).
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 1036.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: Yes — username vodafoneadsl, password vodafoneadsl.
  4. Use VLAN for internet access: on, VLAN ID 1036.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username vodafoneadsl, password vodafoneadsl); VLAN ID 1036.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE; VLAN 1036 where your firmware offers it.
WAN authPPPoE
VLAN1036 (802.1Q tagged)
Priority / PCPNot stated
MTUDefault

What Vodafone Italia officially documents

Connect the router's Gigabit WAN port to the Vodafone ONT with a Cat 5e or better cable. Choose PPPoE as the WAN connection type with NAT enabled. Tag the WAN with 802.1Q VLAN ID 1036. Use vodafoneadsl as both PPPoE username and password. For FTTC (VDSL2) use the same credentials and VLAN 1036 with PTM encapsulation.

Before you remove the Vodafone Italia box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. No TV dependency is documented. Official page is in Vodafone's Business support section; consumer page not reachable, so confirm for consumer lines. MTU and priority not stated. VoIP: SIP domain ims.vodafone.it (UDP 5060); line-specific voice credentials via 190 or contract attachment. Page shows no update date.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. Tag the WAN with VLAN 1036; a missing or wrong tag is the most common reason a new router gets no connection. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.