HHLONIX
EN

Germany · NetCologne

Can I use my own router with NetCologne?

Yes. NetCologne documents PPPoE on VLAN 10 with your account's broadband login. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Ajay Suresh · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

NetCologne Glasfaser (FTTH) — own router, PPPoE on VLAN 10

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN (GPON/XGS-PON; DSL and cable also offered)
WAN connection
PPPoE
VLAN
VLAN 10 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Plug the router's WAN port into the ONT's Ethernet port (or use a router with a matching GPON/XGS-PON SFP if your line has no active ONT).
  2. Create the internet connection as PPPoE (PAP/CHAP) on a tagged 802.1Q WAN interface with VLAN ID 10.
  3. Enter your personal NetCologne PPPoE username and password.
  4. Turn on IPv6 with DHCPv6 prefix delegation and DS-Lite, letting the router learn the AFTR address automatically (no manual AFTR entry needed).
  5. For telephony, add a second WAN interface on VLAN 20 that gets an IPv4 address by DHCP, then configure SIP with your NetCologne SIP data.

Copy-paste router configuration

Generated from the settings above. Use the broadband username and password from your provider account or welcome email. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan.10'
uci set network.wan.proto='pppoe'
uci set network.wan.username='YOUR_BROADBAND_USERNAME'
uci set network.wan.password='YOUR_BROADBAND_PASSWORD'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface vlan add name=wan-vlan10 vlan-id=10 interface=ether1
/interface pppoe-client add name=pppoe-out1 interface=wan-vlan10 user="YOUR_BROADBAND_USERNAME" password="YOUR_BROADBAND_PASSWORD" add-default-route=yes use-peer-dns=yes disabled=no
/interface list member add list=WAN interface=pppoe-out1
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 10.
  3. IPv4 connection: PPPoE — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 10, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: PPPoE, username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username YOUR_BROADBAND_USERNAME and password YOUR_BROADBAND_PASSWORD.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 10, PRIO 0.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 10.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: Yes — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Use VLAN for internet access: on, VLAN ID 10.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD); VLAN ID 10.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE; VLAN 10 where your firmware offers it.
WAN authPPPoE
VLAN10 (802.1Q tagged)
Priority / PCPNot stated
MTUDefault

What NetCologne officially documents

Plug the router's WAN port into the ONT's Ethernet port (or use a router with a matching GPON/XGS-PON SFP if your line has no active ONT). Create the internet connection as PPPoE (PAP/CHAP) on a tagged 802.1Q WAN interface with VLAN ID 10. Enter your personal NetCologne PPPoE username and password. Turn on IPv6 with DHCPv6 prefix delegation and DS-Lite, letting the router learn the AFTR address automatically (no manual AFTR entry needed). For telephony, add a second WAN interface on VLAN 20 that gets an IPv4 address by DHCP, then configure SIP with your NetCologne SIP data.

Before you remove the NetCologne box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. From NetCologne's official interface specification (v1.2, May 2024). The VLAN IDs are given network-wide, not split by access type. The document lists VLAN 7 under 802.1Q without saying what it carries. MTU is not stated. Where to find the PPPoE username and password is not stated. Voice uses SIP over IPv4 on VLAN 20, with DHCP option 60 (Class-ID); the document does not give the SIP server or credentials. IPTV is not covered.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. Tag the WAN with VLAN 10; a missing or wrong tag is the most common reason a new router gets no connection. Internet uses DS-Lite (native IPv6 plus IPv4 via AFTR from DHCPv6 option 64); IPv6 prefix via DHCPv6-PD. Voice runs separately on VLAN 20 (IPoE/DHCP). Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.