HHLONIX
EN

Germany · Deutsche Telekom

Can I use my own router with Deutsche Telekom FTTH?

Yes with suitable hardware. Telekom supports compatible routers using an integrated fibre modem, SFP module or external fibre modem. For an external fibre modem/ONT plus Ethernet router, Telekom-hosted support guidance confirms PPPoE over VLAN 7.

Fibre-optic broadband infrastructure
Illustrative photograph; equipment and compatibility may differ.Ranch9613 · CC0 1.0 · Wikimedia Commons
Page reviewed 6 November 2026Dataset snapshot 23 September 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Deutsche Telekom FTTH — external fibre modem / ONT

Own-router path
Own router connects directly (medium-confidence evidence)
Physical handoff
FTTH external fibre modem / ONT → Ethernet WAN
WAN connection
PPPoE
VLAN
VLAN 7 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Use a Telekom-compatible fibre modem/ONT or integrated optical router.
  2. For an external fibre modem/ONT plus Ethernet router, Telekom-hosted support confirms PPPoE over VLAN 7.
  3. Use Telekom access credentials or Easy Login where supported.

Copy-paste router configuration

Generated from the settings above. Use the broadband username and password from your provider account or welcome email. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan.7'
uci set network.wan.proto='pppoe'
uci set network.wan.username='YOUR_BROADBAND_USERNAME'
uci set network.wan.password='YOUR_BROADBAND_PASSWORD'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface vlan add name=wan-vlan7 vlan-id=7 interface=ether1
/interface pppoe-client add name=pppoe-out1 interface=wan-vlan7 user="YOUR_BROADBAND_USERNAME" password="YOUR_BROADBAND_PASSWORD" add-default-route=yes use-peer-dns=yes disabled=no
/interface list member add list=WAN interface=pppoe-out1
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 7.
  3. IPv4 connection: PPPoE — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 7, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: PPPoE, username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username YOUR_BROADBAND_USERNAME and password YOUR_BROADBAND_PASSWORD.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 7, PRIO 0.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 7.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: Yes — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Use VLAN for internet access: on, VLAN ID 7.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD); VLAN ID 7.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE; VLAN 7 where your firmware offers it.
FTTH own hardwareSupported
External modem + Ethernet routerSupported pattern
WAN authPPPoE
VLAN7 in cited Telekom-hosted guidance

The optical modem and router are separate decisions

Telekom's official compatibility page supports several models: integrated optical router, SFP-based router or a separate fibre modem in front of an Ethernet router.

Why VLAN 7 is marked medium-confidence evidence

The explicit PPPoE/VLAN 7 statement comes from Telekom-hosted community support, where a Telekom team member confirms the setting. Hlonix therefore uses it but labels the profile medium rather than high confidence.

FTTB is not this profile

Telekom's current documentation says FTTB can require G.fast-capable hardware. Do not use this FTTH Ethernet-router verdict for an FTTB/G.fast line.

Next step

Evidence

Page reviewed 6 November 2026 · compatibility dataset snapshot 23 September 2026.