HHLONIX
EN

Germany · Vodafone

Can I use my own router with Vodafone Cable Germany?

Yes, while keeping the Vodafone Station as the cable modem. Vodafone documents Modem/Bridge Mode, which passes the public IP to LAN port 1 and disables the gateway's normal Wi-Fi/router role.

Cable modem equipment
Illustrative photograph; equipment and compatibility may differ.Kuohuanhuan · CC BY 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Dataset snapshot 23 September 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Vodafone Cable — Vodafone Station bridge mode

Own-router path
Gateway stays — use bridge/modem mode
Physical handoff
DOCSIS cable via Vodafone Station
WAN connection
Handled by the provider gateway
VLAN
Handled by provider device
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Enable Modem Mode / Bridge Mode on the Vodafone Station where available for your region/service.
  2. The public IP is handed to LAN port 1; other LAN ports and Wi-Fi are disabled in modem mode.
  3. Connect your own router WAN port to LAN port 1.

Vodafone DSL/VDSL — own router, PPPoE on VLAN 7

Own-router path
Own router connects directly
Physical handoff
VDSL line → own VDSL modem-router (or modem + router)
WAN connection
PPPoE
VLAN
VLAN 7 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Connect a VDSL-capable router to the phone socket. If you use a separate modem, connect your router behind it.
  2. Set up the internet connection as PPPoE on WAN VLAN 7.
  3. Enter the internet access username and password from your Vodafone welcome letter (Willkommensbrief).
  4. Turn on IPv6 and request a /56 prefix by DHCPv6 prefix delegation over the PPPoE session.
  5. For telephony, enter your phone numbers and SIP data. Vodafone's DSL telephony PDF linked from its help page has the details.

Copy-paste router configuration

Generated from the settings above. Use the broadband username and password from your provider account or welcome email. Menu names vary by firmware version.

UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 7.
  3. IPv4 connection: PPPoE — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 7, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: PPPoE, username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username YOUR_BROADBAND_USERNAME and password YOUR_BROADBAND_PASSWORD.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 7, PRIO 0.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 7.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: via DSL (VDSL).
  3. Account information required: Yes — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Use VLAN for internet access: on, VLAN ID 7.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD); VLAN ID 7.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE; VLAN 7 where your firmware offers it.

Vodafone Glasfaser (FTTH, non-cable) — own fibre router or router behind ONT

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN, or router with built-in fibre modem
WAN connection
Not published — ask the provider
VLAN
Confirm with provider
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Use a router with a built-in fibre modem, or plug a normal router's WAN port into a separate Glasfaser modem (ONT).
  2. In the router's internet setup, choose Vodafone as the provider if it is listed, or pick the generic connection type your router suggests.
  3. Enter the access data and phone numbers from your Vodafone welcome letter.
  4. Check Vodafone's linked FRITZ!Box Glasfaser guides for the exact connection values. The help page itself does not give them.
Vodafone StationStays as cable modem
ModeModem / Bridge Mode
Public IPPassed to LAN 1
Own routerHandles home LAN/Wi-Fi

Bridge mode removes the router role, not the cable modem

The Vodafone Station still terminates DOCSIS from the coax network. Your Ethernet router takes over NAT, firewall and Wi-Fi behind it.

Availability has regional/account conditions

Vodafone documents region-specific activation paths and notes conditions such as Dual Stack/IPv4 and SuperWLAN/Homespot settings. Use the current account instructions rather than assuming one menu applies everywhere.

Phone and provider features can be affected

Vodafone's own Bridge Mode explainer notes that router functions including Wi-Fi and telephony can be disabled/affected in modem mode, so bundled services deserve a separate check.

Next step

Evidence

Page reviewed 6 November 2026 · compatibility dataset snapshot 23 September 2026.