HHLONIX
EN

New Zealand

Using your own router in New Zealand

New Zealand providers often publish unusually clear BYO settings, but the WAN method is not universal. Spark Fibre uses PPPoE + VLAN 10, One NZ Fibre/HFC uses IPoE/DHCP + VLAN 10, Skinny Fibre currently documents PPPoE with VLAN tagging disabled, and 2degrees, Slingshot and Orcon publish DHCP + VLAN 10 with priority 0.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Wikideas1 · CC0 1.0 · Wikimedia Commons
Page reviewed 28 September 2026Dataset snapshot 23 September 2026Cited sources 7How Hlonix verifies →

Side-by-side

New Zealand ISP router settings compared

WAN authentication, VLAN and handoff per service profile. Open an ISP for step-by-step settings, or test your exact router in the checker.

10 profiles
ISP / serviceHandoffWAN connectionVLANOwn-router pathPhone / voice
Spark Fibre — BYO router via ONTFibre ONT → Ethernet WANPPPoEVLAN 10 (802.1Q tagged)Own router connects directlyCheck with your provider
One NZ Fibre / HFC — BYO routerFibre ONT or HFC Ethernet handoff → routerDHCPVLAN 10 (802.1Q tagged)Own router connects directlyProvider hub required
Skinny Fibre — BYO routerFibre ONT → Ethernet WANPPPoENone — untaggedOwn router connects directlyCheck with your provider
2degrees Fibre — BYO modemFibre ONT → Ethernet WANDHCPVLAN 10 (802.1Q tagged)Own router connects directlyCheck with your provider
Slingshot Fibre — BYO modemFibre ONT → Ethernet WANDHCPVLAN 10 (802.1Q tagged)Own router connects directlyCheck with your provider
Orcon Fibre — BYO modemFibre ONT → Ethernet WANDHCPVLAN 10 (802.1Q tagged)Own router connects directlyCheck with your provider
Voyager UFB Fibre — own router (IPoE/DHCP)Fibre ONT → Ethernet WANDHCPVLAN 10 (802.1Q tagged)Own router connects directlyProvider hub required
Voyager UFB Fibre — own router (PPPoE)Fibre ONT → Ethernet WANPPPoEVLAN 10 (802.1Q tagged)Own router connects directlyProvider hub required
Contact Energy Broadband UFB Fibre — own routerFibre ONT → Ethernet WANDHCPVLAN 10 (802.1Q tagged)Own router connects directlyProvider hub required
Nova Energy Broadband UFB Fibre — own routerFibre ONT → Ethernet WANPPPoEVLAN 10 (802.1Q tagged)Own router connects directlyProvider hub required
Spark FibrePPPoE + VLAN 10
One NZ Fibre / HFCIPoE/DHCP + VLAN 10
Skinny FibrePPPoE, VLAN off
2degrees / Slingshot / OrconDHCP + VLAN 10
One NZ voice callingSupported One NZ modem required

Do not copy the VLAN rule from the wrong ISP

Spark and One NZ both use VLAN 10 on the cited Fibre profiles, but Skinny's current BYO Fibre instructions explicitly say VLAN tagging off. The common country does not imply a common WAN profile.

The ONT still matters

For Fibre, the provider-facing optical network is terminated by the ONT. Your own router connects by Ethernet, then applies the provider's PPPoE or DHCP/VLAN rules.

Voice can force provider equipment back into the path

One NZ says its voice calling over broadband service requires a supported One NZ modem, so an internet-only compatibility result does not automatically cover voice.

Next step

Evidence

Page reviewed 28 September 2026 · compatibility dataset snapshot 23 September 2026.