HHLONIX
EN

New Zealand · Nova Energy

Can I use my own router with Nova Energy?

Yes. Nova Energy documents PPPoE on VLAN 10 and generic login values. Phone service needs the provider device.

Network equipment and server rack
Illustrative photograph; equipment and compatibility may differ.Shixart1985 · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Nova Energy Broadband UFB Fibre — own router

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN
WAN connection
PPPoE
VLAN
VLAN 10 (802.1Q tagged)
ISP phone / voice
Provider hub required
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Connect the router's WAN port to the fibre ONT.
  2. Choose PPPoE as the connection type.
  3. Enable VLAN tagging with ID 10 and priority 0.
  4. Enter the generic login Nova publishes: the username is the email-style value on Nova's help page (read as user@novaconnect.nz — check the live page) and the password is password.

Copy-paste router configuration

Generated from the settings above. Generic values published by the provider — any non-empty value is accepted where the provider says so. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan.10'
uci set network.wan.proto='pppoe'
uci set network.wan.username='user@novaconnect.nz'
uci set network.wan.password='password'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface vlan add name=wan-vlan10 vlan-id=10 interface=ether1
/interface pppoe-client add name=pppoe-out1 interface=wan-vlan10 user="user@novaconnect.nz" password="password" add-default-route=yes use-peer-dns=yes disabled=no
/interface list member add list=WAN interface=pppoe-out1
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: on, 10.
  3. IPv4 connection: PPPoE — username user@novaconnect.nz, password password.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Interfaces → VLANs (OPNsense: Interfaces → Other Types → VLAN): parent = WAN NIC, tag 10, priority 0.
  2. Interfaces → Assignments: assign the new VLAN as WAN.
  3. WAN → IPv4 configuration type: PPPoE, username user@novaconnect.nz, password password.
  4. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username user@novaconnect.nz and password password.
  2. LAN → IPTV → Select ISP Profile: Manual → Internet: VID 10, PRIO 0.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username user@novaconnect.nz, password password).
  2. Advanced → Network → IPTV/VLAN: enable, Mode Custom, Internet VLAN ID 10.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: Yes — username user@novaconnect.nz, password password.
  4. Use VLAN for internet access: on, VLAN ID 10.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username user@novaconnect.nz, password password); VLAN ID 10.
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE; VLAN 10 where your firmware offers it.
WAN authPPPoE
VLAN10 (802.1Q tagged)
Priority / PCP0
MTUDefault

What Nova Energy officially documents

Connect the router's WAN port to the fibre ONT. Choose PPPoE as the connection type. Enable VLAN tagging with ID 10 and priority 0. Enter the generic login Nova publishes: the username is the email-style value on Nova's help page (read as user@novaconnect.nz — check the live page) and the password is password.

Before you remove the Nova Energy box

Phone service on this connection depends on the provider device. TV services may use their own VLAN or box; check before swapping. The residential page obfuscates the username email; the business page shows user@novaconnect.nz and both show password 'password'. MTU and IPv6 not stated. VoIP home phone requires the supplied NetComm modem. No page date.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. Tag the WAN with VLAN 10; a missing or wrong tag is the most common reason a new router gets no connection. Confirm the generic username on Nova's help page; the password is password. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.