Canada · Rogers
Can I use my own router with Rogers?
Yes. Rogers documents bridge mode specifically for adding a third-party Wi-Fi router. The Rogers gateway remains as the provider-facing modem/access device while your router takes over the home network.
.jpg/960px-Ethernet_Port_(49790583026).jpg)
Quick reference
Own-router settings at a glance
From official provider sources cited below. Pick your router for a full verdict with topology and caveats.
Rogers Xfinity Gateway — bridge mode + own router
- Own-router path
- Gateway stays — use bridge/modem mode
- Physical handoff
- Rogers gateway retained as modem/access device
- WAN connection
- Handled by the provider gateway
- VLAN
- Handled by provider device
- ISP phone / voice
- Check with your provider
- ISP TV
- Check with your provider
- Evidence confidence
- High — official provider source
Settings to enter on your router
- Enable bridge mode on the Rogers gateway.
- Connect the third-party router to the bridged gateway Ethernet port.
- The third-party router then receives the public-side connection and handles your home network.
Instant verdict for your router:eero 6+Deco X50/X55ASUS RT-AX86U ProArcher BE550Orbi RBK760Nest Wifi ProOther router
Other Canadian ISPs:TELUSCogecoShaw (Rogers)TekSavvyStart.caExeculinkCompare all Canadian ISP settings
What bridge mode does
It disables the gateway's router/Wi-Fi role and lets the downstream router handle NAT, firewall and wireless networking.
Gateway model still matters
Rogers publishes model-specific instructions. Use the instructions for the exact gateway on the account rather than applying a generic menu path from another model.
Home phone and managed services
Rogers notes additional checks around home phone when toggling bridge mode. If those services matter, verify them after the change before treating the setup as complete.
Next step
Evidence
- Rogers — bridge mode with a third-party router (official ISP)
Page reviewed 28 September 2026 · compatibility dataset snapshot 23 September 2026.