Canada · Shaw (Rogers)
Can I use my own router with Shaw (Rogers)?
Partly. Gateway stays — use bridge/modem mode. Check phone and TV services before you remove the provider box.

Quick reference
Own-router settings at a glance
From official provider sources cited below. Pick your router for a full verdict with topology and caveats.
Shaw Internet (now Rogers) — modem bridge mode via support
- Own-router path
- Gateway stays — use bridge/modem mode
- Physical handoff
- Coax → Shaw/Rogers modem (bridge mode) → your router
- WAN connection
- Handled by the cable modem
- VLAN
- Handled by provider device
- ISP phone / voice
- Check with your provider
- ISP TV
- Check with your provider
- Evidence confidence
- Medium — verify account details
Settings to enter on your router
- If you have a Rogers Xfinity gateway, enable bridge mode yourself using Rogers' linked guide.
- For all other Shaw modems, contact Rogers live chat so an advisor can switch the modem to bridge mode.
- Connect your router to one modem Ethernet port; the modem's Wi-Fi turns off in bridge mode.
- Router WAN settings are not stated on the page; automatic/DHCP is the router default to try, but confirm with support.
Instant verdict for your router:eero 6+Deco X50/X55ASUS RT-AX86U ProArcher BE550Orbi RBK760Nest Wifi ProOther router
Other Canadian ISPs:RogersTELUSCogecoTekSavvyStart.caExeculinkCompare all Canadian ISP settings
What Shaw (Rogers) officially documents
If you have a Rogers Xfinity gateway, enable bridge mode yourself using Rogers' linked guide. For all other Shaw modems, contact Rogers live chat so an advisor can switch the modem to bridge mode. Connect your router to one modem Ethernet port; the modem's Wi-Fi turns off in bridge mode. Router WAN settings are not stated on the page; automatic/DHCP is the router default to try, but confirm with support.
Before you remove the Shaw (Rogers) box
The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Shaw-specific setup page now hosted on rogers.com (French version fetched). Customer-owned modems not addressed. Shaw TV/Ignite impact not stated.
Common setup mistakes
If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.
Next step
Evidence
- Rogers (Shaw setup section) — configuring your wireless modem in bridge mode (official support, French) (official ISP)
Page reviewed 6 November 2026 · profile researched 6 November 2026.