United Kingdom · BT
Can I use my own router with BT Full Fibre?
The core technical path is PPPoE over Ethernet to the Openreach ONT. Hlonix labels this medium confidence because the clearest official BT third-party-router page found is for BT Business; consumer evidence is supplemented by BT Community and router-vendor guidance.

Quick reference
Own-router settings at a glance
From official provider sources cited below. Pick your router for a full verdict with topology and caveats.
BT Full Fibre (FTTP)
- Own-router path
- Own router connects directly (medium-confidence evidence)
- Physical handoff
- Openreach FTTP / ONT
- WAN connection
- PPPoE
- VLAN
- None — untagged
- ISP phone / voice
- Provider hub required
- ISP TV
- Check with your provider
- Evidence confidence
- Medium — verify account details
Settings to enter on your router
- BT's business documentation confirms PPPoE and third-party-router use; consumer Full Fibre community guidance also documents direct ONT use.
- The ONT handles the access-side VLAN in the cited consumer setup.
- Treat Digital Voice as hub-dependent unless BT confirms otherwise for your account.
Copy-paste router configuration
Generated from the settings above. Use the broadband username and password from your provider account or welcome email. Menu names vary by firmware version.
OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan'
uci set network.wan.proto='pppoe'
uci set network.wan.username='YOUR_BROADBAND_USERNAME'
uci set network.wan.password='YOUR_BROADBAND_PASSWORD'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restartMikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface pppoe-client add name=pppoe-out1 interface=ether1 user="YOUR_BROADBAND_USERNAME" password="YOUR_BROADBAND_PASSWORD" add-default-route=yes use-peer-dns=yes disabled=no
/interface list member add list=WAN interface=pppoe-out1UniFi
- Settings → Internet → select the WAN (Primary) → Advanced: Manual.
- VLAN ID: off.
- IPv4 connection: PPPoE — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
- Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
- Use the physical WAN NIC as WAN.
- WAN → IPv4 configuration type: PPPoE, username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
- Save, apply, then power-cycle the ONT/modem.
ASUS
- WAN → Internet Connection → WAN Connection Type: PPPoE; enter username YOUR_BROADBAND_USERNAME and password YOUR_BROADBAND_PASSWORD.
- LAN → IPTV: leave ISP Profile on None.
- Apply and reboot the ONT/modem.
TP-Link
- Advanced → Network → Internet: connection type PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
- IPTV/VLAN: leave disabled.
- Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
- Save and restart the ONT/modem.
FRITZ!Box
- Internet → Account Information → Internet service provider: Other Internet service provider.
- Connection: external modem or router (LAN 1 as WAN).
- Account information required: Yes — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
- Use VLAN for internet access: off.
- Apply and restart the ONT/modem.
eero / Nest
- eero app → Settings → Network settings → ISP settings: PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
- Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE.
Instant verdict for your router:eero 6+Deco X50/X55ASUS RT-AX86U ProArcher BE550Orbi RBK760Nest Wifi ProOther router
Other UK ISPs:EEVodafoneVirgin MediaPlusnetSkyTalkTalkZen InternetCommunity FibreYouFibreGigaclearCuckooAndrews & ArnoldCompare all UK ISP settings
Why confidence is medium
The physical ONT and PPPoE pattern is well established, but Hlonix distinguishes official BT Business documentation from consumer community/vendor evidence rather than presenting them as the same authority.
Internet-only vs managed features
A router can establish the broadband session while Digital Voice or other provider services still depend on BT equipment.
Practical fallback
Keep the BT hub available. If a fault is raised, provider support may ask for the supported hub to be reconnected before investigating the line.
Next step
Evidence
- BT Business — using your own broadband modem or router (official ISP, business service)
- BT Community — Full Fibre own-router PPPoE discussion (community / secondary)
- TP-Link — BT Full Fibre setup (official manufacturer)
Page reviewed 6 November 2026 · compatibility dataset snapshot 23 September 2026.