United Kingdom · TalkTalk
Can I use my own router with TalkTalk?
Yes. TalkTalk documents DHCP / IPoE on VLAN 101. Check phone and TV services before you remove the provider box.

Quick reference
Own-router settings at a glance
From official provider sources cited below. Pick your router for a full verdict with topology and caveats.
TalkTalk Fibre — own router (DHCP/IPoE, VLAN 101)
- Own-router path
- Own router connects directly
- Physical handoff
- Fibre: FTTP ONT → Ethernet WAN, or FTTC line → VDSL (PTM) modem-router
- WAN connection
- DHCP
- VLAN
- VLAN 101 (802.1Q tagged)
- ISP phone / voice
- Check with your provider
- ISP TV
- Check with your provider
- Evidence confidence
- Medium — verify account details
Settings to enter on your router
- Set the WAN connection type to DHCP (IPoE / dynamic IP); there is no PPP login.
- Leave the username and password fields empty — TalkTalk authenticates the line automatically.
- Enable VLAN tagging on the WAN with VLAN ID 101 and priority 0.
- Set MTU to 1500 and leave DNS on automatic.
- On a VDSL modem-router choose PTM as the transfer mode; on full fibre plug the router WAN port into the ONT.
- Save and reboot the router.
Instant verdict for your router:eero 6+Deco X50/X55ASUS RT-AX86U ProArcher BE550Orbi RBK760Nest Wifi ProOther router
Other UK ISPs:EEVodafoneVirgin MediaPlusnetBTSkyZen InternetCommunity FibreYouFibreGigaclearCuckooAndrews & ArnoldCompare all UK ISP settings
What TalkTalk officially documents
Set the WAN connection type to DHCP (IPoE / dynamic IP); there is no PPP login. Leave the username and password fields empty — TalkTalk authenticates the line automatically. Enable VLAN tagging on the WAN with VLAN ID 101 and priority 0. Set MTU to 1500 and leave DNS on automatic. On a VDSL modem-router choose PTM as the transfer mode; on full fibre plug the router WAN port into the ONT. Save and reboot the router.
Before you remove the TalkTalk box
The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. The official page gives one 'fibre' profile and does not separate FTTC from FTTP. It warns some third-party routers are not fibre-compatible. Non-fibre (ADSL-type) lines use PPPoA VC-MUX, VPI/VCI 0/38, MTU 1432, username = phone number@talktalk.net with blank password. TalkTalk TV settings are only given for non-fibre lines (IGMP v2/v3, second bridge on 0/65); no fibre TV settings stated. No voice guidance. Page metadata last modified 28 July 2025.
Common setup mistakes
Choose Dynamic IP / DHCP (IPoE), not PPPoE — there is no broadband login to enter. Tag the WAN with VLAN 101; a missing or wrong tag is the most common reason a new router gets no connection. Transfer mode PTM on VDSL routers; DNS automatic Power-cycle the ONT or modem after swapping routers so it releases the old session.
Next step
Evidence
Page reviewed 6 November 2026 · profile researched 6 November 2026.