HHLONIX
EN

United Kingdom · Zen Internet

Can I use my own router with Zen Internet?

Yes. Zen Internet documents PPPoE with no VLAN tag with your account's broadband login. Check phone and TV services before you remove the provider box.

Network equipment and server rack
Illustrative photograph; equipment and compatibility may differ.Shixart1985 · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Zen Full Fibre (FTTP) — own router via PPPoE, no VLAN

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN
WAN connection
PPPoE
VLAN
None — untagged
ISP phone / voice
Check with your provider
ISP TV
No dependency documented
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Connect the router WAN port to the fibre ONT and choose an Ethernet / external-modem internet connection.
  2. Select PPPoE and set the connection to stay up permanently.
  3. Enter your Zen broadband username (format like zen123456@zen) and your Zen broadband password.
  4. Leave VLAN tagging disabled.
  5. Save the settings and wait for the PPP session to connect.

Copy-paste router configuration

Generated from the settings above. Use the broadband username and password from your provider account or welcome email. Menu names vary by firmware version.

OpenWrt
# OpenWrt 23.05+ (DSA). WAN port is usually 'wan' (older targets: 'eth1').
uci set network.wan.device='wan'
uci set network.wan.proto='pppoe'
uci set network.wan.username='YOUR_BROADBAND_USERNAME'
uci set network.wan.password='YOUR_BROADBAND_PASSWORD'
uci set network.wan6.device='@wan'
uci commit network
/etc/init.d/network restart
MikroTik
# RouterOS 7, default config (ether1 = WAN, interface list WAN exists)
/interface pppoe-client add name=pppoe-out1 interface=ether1 user="YOUR_BROADBAND_USERNAME" password="YOUR_BROADBAND_PASSWORD" add-default-route=yes use-peer-dns=yes disabled=no
/interface list member add list=WAN interface=pppoe-out1
UniFi
  1. Settings → Internet → select the WAN (Primary) → Advanced: Manual.
  2. VLAN ID: off.
  3. IPv4 connection: PPPoE — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Apply, then power-cycle the ONT/modem.
pfSense / OPNsense
  1. Use the physical WAN NIC as WAN.
  2. WAN → IPv4 configuration type: PPPoE, username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  3. Save, apply, then power-cycle the ONT/modem.
ASUS
  1. WAN → Internet Connection → WAN Connection Type: PPPoE; enter username YOUR_BROADBAND_USERNAME and password YOUR_BROADBAND_PASSWORD.
  2. LAN → IPTV: leave ISP Profile on None.
  3. Apply and reboot the ONT/modem.
TP-Link
  1. Advanced → Network → Internet: connection type PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
  2. IPTV/VLAN: leave disabled.
  3. Deco app: More → Advanced → IPTV/VLAN and Internet connection use the same values.
  4. Save and restart the ONT/modem.
FRITZ!Box
  1. Internet → Account Information → Internet service provider: Other Internet service provider.
  2. Connection: external modem or router (LAN 1 as WAN).
  3. Account information required: Yes — username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD.
  4. Use VLAN for internet access: off.
  5. Apply and restart the ONT/modem.
eero / Nest
  1. eero app → Settings → Network settings → ISP settings: PPPoE (username YOUR_BROADBAND_USERNAME, password YOUR_BROADBAND_PASSWORD).
  2. Google Home app (Nest Wifi Pro) → Wi-Fi → Network settings → Advanced networking → WAN: PPPoE.
WAN authPPPoE
VLANNone — untagged
Priority / PCP—
MTUDefault

What Zen Internet officially documents

Connect the router WAN port to the fibre ONT and choose an Ethernet / external-modem internet connection. Select PPPoE and set the connection to stay up permanently. Enter your Zen broadband username (format like zen123456@zen) and your Zen broadband password. Leave VLAN tagging disabled. Save the settings and wait for the PPP session to connect.

Before you remove the Zen Internet box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. No TV dependency is documented. Zen's official page is written as a FRITZ!Box walkthrough (connection via external modem, VLAN unticked, PPP login zen…@zen). MTU and authentication protocol are not stated. Credentials are account-specific; the page does not say where to find them. No VoIP guidance on the page. Page metadata last modified 7 July 2026.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. Leave WAN VLAN tagging off; adding a tag here breaks the connection. Username format zen123456@zen Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.