HHLONIX
EN

United Kingdom · Cuckoo

Can I use my own router with Cuckoo?

Yes. Cuckoo documents PPPoE with a line-dependent VLAN with your account's broadband login. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Swpb · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Cuckoo Full Fibre — own router via PPPoE (login from support)

Own-router path
Depends on line authentication and router
Physical handoff
Fibre ONT → Ethernet WAN
WAN connection
PPPoE
VLAN
Confirm with provider
ISP phone / voice
Check with your provider
ISP TV
No dependency documented
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Ask Cuckoo Customer Support for your PPPoE login details (they are also sent before go-live).
  2. Connect your router's RJ45 WAN port to the ONT with an Ethernet cable.
  3. Choose PPPoE as the WAN connection type and enter the username and password Cuckoo gave you.
  4. Leave VLAN and MTU at defaults unless Cuckoo tells you otherwise (not stated officially).
  5. Keep the supplied eero — it must be returned if you leave.
WAN authPPPoE
VLANVaries — confirm for your line
Priority / PCP—
MTUDefault

What Cuckoo officially documents

Ask Cuckoo Customer Support for your PPPoE login details (they are also sent before go-live). Connect your router's RJ45 WAN port to the ONT with an Ethernet cable. Choose PPPoE as the WAN connection type and enter the username and password Cuckoo gave you. Leave VLAN and MTU at defaults unless Cuckoo tells you otherwise (not stated officially). Keep the supplied eero — it must be returned if you leave.

Before you remove the Cuckoo box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. No TV dependency is documented. Own routers allowed with reduced support. Cuckoo's help page refers to PPPoE login details but does not name VLAN, MTU or other parameters. Cuckoo is now part of the Onestream family. Support page last updated 15 April 2026.

Common setup mistakes

Choose PPPoE, not Dynamic IP — the line will not come up with DHCP alone. The VLAN depends on the access network behind your line — confirm it with the provider before configuring the router. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.