Australia · Tangerine
Can I use my own router with Tangerine?
Yes. Tangerine documents DHCP / IPoE with a line-dependent VLAN. Check phone and TV services before you remove the provider box.
.jpg/960px-Ethernet_Port_(49790583026).jpg)
Quick reference
Own-router settings at a glance
From official provider sources cited below. Pick your router for a full verdict with topology and caveats.
Tangerine nbn FTTP / FTTC / HFC / Fixed Wireless — own router
- Own-router path
- Own router connects directly
- Physical handoff
- nbn connection box (NTD) → Ethernet WAN
- WAN connection
- DHCP
- VLAN
- Confirm with provider
- ISP phone / voice
- Check with your provider
- ISP TV
- Check with your provider
- Evidence confidence
- High — official provider source
Settings to enter on your router
- Connect the router's WAN port to the nbn connection box and put the router in WAN mode.
- Set encapsulation to IPoE (no login needed).
- If your service was activated before 2 June 2025, use PPPoE instead and enter your ISP username and password exactly.
- FTTN/FTTB: use a VDSL router in VDSL mode on the first (main) phone socket, also IPoE.
Instant verdict for your router:eero 6+Deco X50/X55ASUS RT-AX86U ProArcher BE550Orbi RBK760Nest Wifi ProOther router
Other Australian ISPs:TelstraAussie BroadbandOptusTPGiiNetInternodeVodafone AustraliaLeaptelDodoBelongOriginSwoopSpinTelMATEMoreCompare all Australian ISP settings
What Tangerine officially documents
Connect the router's WAN port to the nbn connection box and put the router in WAN mode. Set encapsulation to IPoE (no login needed). If your service was activated before 2 June 2025, use PPPoE instead and enter your ISP username and password exactly. FTTN/FTTB: use a VDSL router in VDSL mode on the first (main) phone socket, also IPoE.
Before you remove the Tangerine box
The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. VLAN and MTU not stated. Tangerine nbn phone requires a VoIP-capable router; Tangerine recommends its pre-configured router. Separate official pages exist for FTTP, FTTC, HFC, FTTN and Wireless with the same IPoE rule. No page date.
Common setup mistakes
Choose Dynamic IP / DHCP (IPoE), not PPPoE — there is no broadband login to enter. The VLAN depends on the access network behind your line — confirm it with the provider before configuring the router. Services activated before 02/06/25 use PPPoE with account username/password Power-cycle the ONT or modem after swapping routers so it releases the old session.
Next step
Evidence
- Tangerine — BYO FTTP setup (official) (official ISP)
- Tangerine — BYO FTTN/FTTB setup (official) (official ISP)
Page reviewed 6 November 2026 · profile researched 6 November 2026.