HHLONIX
EN

United States

Using your own router in the United States

US broadband is not one topology. AT&T Fiber keeps its supplied gateway and uses IP Passthrough; Xfinity can bridge a leased gateway or use a compatible customer-owned modem; GFiber can hand Ethernet directly to your router; Spectrum keeps a cable modem in front; Fios internet-only can use an ONT Ethernet handoff with caveats.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Wikideas1 · CC0 1.0 · Wikimedia Commons
Page reviewed 28 September 2026Dataset snapshot 23 September 2026Cited sources 7How Hlonix verifies →

Side-by-side

United States ISP router settings compared

WAN authentication, VLAN and handoff per service profile. Open an ISP for step-by-step settings, or test your exact router in the checker.

24 profiles
ISP / serviceHandoffWAN connectionVLANOwn-router pathPhone / voice
AT&T Fiber — supplied BGW gateway + own routerAT&T Fiber through supplied Wi-Fi gatewayManaged by the provider gatewayManaged by provider deviceGateway stays — use IP PassthroughCheck with your provider
Xfinity — leased Wireless Gateway + own routerCable/fiber service through Xfinity Wireless GatewayHandled by the provider gatewayHandled by provider deviceGateway stays — use bridge/modem modeCheck with your provider
Xfinity — customer-owned compatible modem + routerCustomer-owned Xfinity-compatible cable modem → Ethernet routerHandled by the cable modemHandled by provider deviceYour own compatible modem + routerCheck with your provider
Google Fiber / GFiber — own router direct to Fiber JackGFiber Fiber Jack / ONT → Ethernet WANDHCPNone — untaggedOwn router connects directlyCheck with your provider
Spectrum Internet — Spectrum modem + own routerSpectrum cable modem → Ethernet routerHandled by the cable modemHandled by provider deviceProvider modem stays in front of your routerCheck with your provider
Verizon Fios — internet-only own router via ONTFios ONT → Ethernet WANDHCPNone — untaggedOwn router connects directly (medium-confidence evidence)Check with your provider
CenturyLink internet — third-party modem/router with VLAN 201CenturyLink line → third-party modem/router (VLAN-tagged WAN)Not published — ask the providerVLAN 201 (802.1Q tagged)Depends on line authentication and routerCheck with your provider
Quantum Fiber — own router behind the Quantum modem / SmartNIDFibre → Quantum Fiber modem or SmartNID → your router (Ethernet)Handled by the provider gatewayHandled by provider deviceProvider hub/router must stayCheck with your provider
Frontier Fiber — own router only after activation, unsupportedFibre ONT → Frontier router (required for activation) → optional own routerNot published — ask the providerConfirm with providerDepends on line authentication and routerCheck with your provider
Cox Internet — customer-owned certified cable modemCoax → your certified DOCSIS modem → routerHandled by the cable modemHandled by provider deviceYour own compatible modem + routerCheck with your provider
Optimum Internet (cable) — customer-owned DOCSIS 3.1 modemCoax → your DOCSIS 3.1 modem → routerHandled by the cable modemHandled by provider deviceYour own compatible modem + routerCheck with your provider
Ziply Fiber — own router on the ONTFibre ONT → Ethernet WANNot published — ask the providerConfirm with providerOwn router connects directly (medium-confidence evidence)Check with your provider
Sonic Fiber — own router, DHCP (no PPPoE)Fibre ONT → Ethernet WANDHCPConfirm with providerOwn router connects directlyCheck with your provider
Metronet — own wireless router allowedFibre ONT → your routerNot published — ask the providerConfirm with providerOwn router connects directly (medium-confidence evidence)Check with your provider
Brightspeed Fiber — own router on the ONT (DHCP)Fibre ONT → Ethernet WANDHCPConfirm with providerOwn router connects directlyCheck with your provider
Kinetic Fiber — own router if compatible with the ONTFibre ONT → Ethernet WANNot published — ask the providerConfirm with providerDepends on line authentication and routerCheck with your provider
T-Mobile 5G Home Internet — own router behind the gateway (no bridge mode)T-Mobile 5G gateway → Ethernet LAN → your routerHandled by the provider gatewayHandled by provider deviceProvider hub/router must stayNo dependency documented
Verizon 5G Home Internet — Verizon Internet Gateway in IP Passthrough modeVerizon Internet Gateway (IP Passthrough) → LAN2 → your routerHandled by the provider gatewayHandled by provider deviceGateway stays — use IP PassthroughNo dependency documented
Astound cable internet — customer-owned DOCSIS 3.1 modemCoax → your approved DOCSIS 3.1 modem → routerHandled by the cable modemHandled by provider deviceYour own compatible modem + routerProvider hub required
Astound fiber-to-the-home / Ethernet-delivered — Astound equipment requiredFibre/Ethernet hand-off → Astound equipmentHandled by the cable modemHandled by provider deviceProvider modem stays in front of your routerCheck with your provider
Mediacom Xtream internet — customer-owned high-split DOCSIS 3.1 modemCoax → your high-split DOCSIS 3.1 modem → routerHandled by the cable modemHandled by provider deviceYour own compatible modem + routerCheck with your provider
WOW! cable internet — customer-owned DOCSIS modemCoax → your compatible DOCSIS modem → routerHandled by the cable modemHandled by provider deviceYour own compatible modem + routerCheck with your provider
altafiber Fioptics — customer-owned gateway on the ONT (DHCP)Fibre ONT (port 1) or Fioptics data jack → Ethernet WANDHCPNone — untaggedOwn router connects directlyCheck with your provider
EPB Fiber Optics — own WiFi router on the EPB Ethernet jackEPB indoor box Ethernet jack → router WANNot published — ask the providerConfirm with providerOwn router connects directlyCheck with your provider
AT&T FiberGateway stays; IP Passthrough
XfinityBridge leased gateway or use compatible modem
GFiberDirect own-router path
SpectrumCable modem stays
Verizon FiosInternet-only direct path; TV caveats

The biggest US distinction: router vs modem

Cable providers such as Xfinity and Spectrum still need a modem or gateway to terminate the provider network. Replacing the Wi-Fi router does not mean the coax-facing modem disappears.

Fiber can still require provider equipment

GFiber explicitly supports connecting your router to its Fiber Jack. AT&T Fiber is different: the supplied gateway remains part of the supported access path and IP Passthrough is the documented way to hand the WAN address to your router.

TV and support can change the answer

A third-party router may work for internet while provider TV or legacy coax/MoCA features still depend on provider equipment. Hlonix lowers confidence where the best available guidance is provider-hosted community material rather than a direct support article.

Next step

Evidence

Page reviewed 28 September 2026 · compatibility dataset snapshot 23 September 2026.