HHLONIX
EN

United States · Astound Broadband (RCN / Wave / Grande)

Can I use my own router with Astound Broadband (RCN / Wave / Grande)?

Yes, with a compatible modem. Your own compatible modem + router. Phone service needs the provider device.

Mesh Wi-Fi router
Illustrative photograph; equipment and compatibility may differ.TaurusEmerald · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Astound cable internet — customer-owned DOCSIS 3.1 modem

Own-router path
Your own compatible modem + router
Physical handoff
Coax → your approved DOCSIS 3.1 modem → router
WAN connection
Handled by the cable modem
VLAN
Handled by provider device
ISP phone / voice
Provider hub required
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Choose a DOCSIS 3.1 modem from Astound's approved list (e.g. Arris S33, Motorola MB8611, Netgear CM3000); avoid DOCSIS 3.0 and EuroDOCSIS models.
  2. For tiers above 1 Gbps pick a modem with a 2.5GE Ethernet port; the 5G×1G tier requires Astound's own modem.
  3. Connect the modem to the coax outlet and call Astound on 1.800.427.8686 with the modem's MAC address to activate it.
  4. Plug your router's WAN port into the modem and leave the WAN on automatic (no PPPoE/VLAN is described).
  5. Return the Astound rental modem to stop equipment fees.

Astound fiber-to-the-home / Ethernet-delivered — Astound equipment required

Own-router path
Provider modem stays in front of your router
Physical handoff
Fibre/Ethernet hand-off → Astound equipment
WAN connection
Handled by the cable modem
VLAN
Handled by provider device
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Keep the Astound-supplied equipment on fiber-to-the-home or Ethernet-delivered service — Astound does not allow customer-owned modems there.
  2. If you want your own router, connect it behind the Astound device; Astound gives no WAN settings for this.
  3. Contact Astound care to confirm what is supported at your address.
Own-router pathYour own compatible modem + router
WANHandled by the cable modem
PhoneProvider hub required
TVCheck with your provider

What Astound Broadband (RCN / Wave / Grande) officially documents

Choose a DOCSIS 3.1 modem from Astound's approved list (e.g. Arris S33, Motorola MB8611, Netgear CM3000); avoid DOCSIS 3.0 and EuroDOCSIS models. For tiers above 1 Gbps pick a modem with a 2.5GE Ethernet port; the 5G×1G tier requires Astound's own modem. Connect the modem to the coax outlet and call Astound on 1.800.427.8686 with the modem's MAC address to activate it. Plug your router's WAN port into the modem and leave the WAN on automatic (no PPPoE/VLAN is described). Return the Astound rental modem to stop equipment fees. Keep the Astound-supplied equipment on fiber-to-the-home or Ethernet-delivered service — Astound does not allow customer-owned modems there. If you want your own router, connect it behind the Astound device; Astound gives no WAN settings for this. Contact Astound care to confirm what is supported at your address.

Before you remove the Astound Broadband (RCN / Wave / Grande) box

Phone service on this connection depends on the provider device. TV services may use their own VLAN or box; check before swapping. Astound Digital Phone customers must keep an Astound EMTA. Motorola MB8600 has known issues. Fiber Network Upgrade Zones (Lehigh Valley, PA) require the Netgear CM3000.

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.