HHLONIX
EN

United States · Verizon 5G Home

Can I use my own router with Verizon 5G Home?

Partly. Gateway stays — use IP Passthrough.

Broadband router hardware
Illustrative photograph; equipment and compatibility may differ.Project Kei · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Verizon 5G Home Internet — Verizon Internet Gateway in IP Passthrough mode

Own-router path
Gateway stays — use IP Passthrough
Physical handoff
Verizon Internet Gateway (IP Passthrough) → LAN2 → your router
WAN connection
Handled by the provider gateway
VLAN
Handled by provider device
ISP phone / voice
No dependency documented
ISP TV
No dependency documented
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Sign in to the gateway's admin page and open Advanced → Network Settings → Network Connections → Network (Home/Office) → Settings.
  2. In the Bridge section tick IP Passthrough and save; the gateway reboots (about 1–2 minutes, LED turns solid white).
  3. Connect your router's WAN port to the gateway's LAN2 Ethernet port (on the bottom of the unit).
  4. Set your router's WAN to automatic/DHCP so it receives the address passed through by the gateway.
  5. To undo, plug a computer into LAN1, sign in to the admin page and untick IP Passthrough.
Own-router pathGateway stays — use IP Passthrough
WANHandled by the provider gateway
PhoneNo dependency documented
TVNo dependency documented

What Verizon 5G Home officially documents

Sign in to the gateway's admin page and open Advanced → Network Settings → Network Connections → Network (Home/Office) → Settings. In the Bridge section tick IP Passthrough and save; the gateway reboots (about 1–2 minutes, LED turns solid white). Connect your router's WAN port to the gateway's LAN2 Ethernet port (on the bottom of the unit). Set your router's WAN to automatic/DHCP so it receives the address passed through by the gateway. To undo, plug a computer into LAN1, sign in to the admin page and untick IP Passthrough.

Before you remove the Verizon 5G Home box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. No TV dependency is documented. The passthrough article refers to the 'Verizon Internet Gateway' without naming models, so confirm it matches your 5G Home gateway. Verizon owns the gateway (must be returned within 30 days of disconnecting). The router's mobile number cannot be used for calls/texts. Verizon LTE Home not covered (no official own-router page checked). 'proto: dhcp' inferred from 'IP address passes to that device'.

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.