United States · EPB
Can I use my own router with EPB?
Yes. Own router connects directly. Check phone and TV services before you remove the provider box.

Quick reference
Own-router settings at a glance
From official provider sources cited below. Pick your router for a full verdict with topology and caveats.
EPB Fiber Optics — own WiFi router on the EPB Ethernet jack
- Own-router path
- Own router connects directly
- Physical handoff
- EPB indoor box Ethernet jack → router WAN
- WAN connection
- Not published — ask the provider
- VLAN
- Confirm with provider
- ISP phone / voice
- Check with your provider
- ISP TV
- Check with your provider
- Evidence confidence
- Medium — verify account details
Settings to enter on your router
- Buy a WiFi router (EPB suggests WiFi 6 for Gig plans) — not a cable modem, which will not work on fiber.
- Connect the router's WAN/Internet port to the EPB-installed Ethernet jack in the indoor box with a Cat5e cable.
- Leave the WAN on the router's default automatic setting and follow the manufacturer's setup; EPB lists no PPPoE/VLAN settings.
- If the router does not get online, call EPB (423-648-1372) or use Live Chat.
Instant verdict for your router:eero 6+Deco X50/X55ASUS RT-AX86U ProArcher BE550Orbi RBK760Nest Wifi ProOther router
Other US ISPs:AT&TXfinityGFiberSpectrumVerizon FiosCenturyLinkQuantum FiberFrontierCoxOptimumZiply FiberSonicMetronetBrightspeedKinetic (Windstream)T-Mobile Home InternetVerizon 5G HomeAstound Broadband (RCN / Wave / Grande)MediacomWOW!altafiber (Fioptics)Compare all US ISP settings
What EPB officially documents
Buy a WiFi router (EPB suggests WiFi 6 for Gig plans) — not a cable modem, which will not work on fiber. Connect the router's WAN/Internet port to the EPB-installed Ethernet jack in the indoor box with a Cat5e cable. Leave the WAN on the router's default automatic setting and follow the manufacturer's setup; EPB lists no PPPoE/VLAN settings. If the router does not get online, call EPB (423-648-1372) or use Live Chat.
Before you remove the EPB box
The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Official FAQ confirms own routers work but gives no WAN parameters. HomePass/Smart Net Plus features require EPB equipment. For multi-gig, EPB suggests connecting a 2.5G device directly to the jack or using Smart Net Plus.
Common setup mistakes
If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.
Next step
Evidence
- EPB — How do I set up my own WiFi network (official FAQ) (official ISP)
Page reviewed 6 November 2026 · profile researched 6 November 2026.