HHLONIX
EN

United States · Metronet

Can I use my own router with Metronet?

Yes. Own router connects directly (medium-confidence evidence). Check phone and TV services before you remove the provider box.

Mesh Wi-Fi router
Illustrative photograph; equipment and compatibility may differ.Project Kei · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Metronet — own wireless router allowed

Own-router path
Own router connects directly (medium-confidence evidence)
Physical handoff
Fibre ONT → your router
WAN connection
Not published — ask the provider
VLAN
Confirm with provider
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Metronet states you may use your own wireless router instead of the eero.
  2. Connect your router's WAN port to the Metronet ONT/handoff where the eero was connected.
  3. Connection type and VLAN are not published; confirm with Metronet support if the router does not obtain an address.
  4. Return any Metronet eeros when service ends — they only work on Metronet and are deactivated elsewhere.
Own-router pathOwn router connects directly (medium-confidence evidence)
WANNot published — ask the provider
PhoneCheck with your provider
TVCheck with your provider

What Metronet officially documents

Metronet states you may use your own wireless router instead of the eero. Connect your router's WAN port to the Metronet ONT/handoff where the eero was connected. Connection type and VLAN are not published; confirm with Metronet support if the router does not obtain an address. Return any Metronet eeros when service ends — they only work on Metronet and are deactivated elsewhere.

Before you remove the Metronet box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Official page confirms own routers are allowed but gives no technical WAN parameters.

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.