HHLONIX
EN

United States · Sonic

Can I use my own router with Sonic?

Yes. Sonic documents DHCP / IPoE with a line-dependent VLAN. Check phone and TV services before you remove the provider box.

Ethernet cable and network connections
Illustrative photograph; equipment and compatibility may differ.Santeri Viinamäki · CC BY-SA 4.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 2How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Sonic Fiber — own router, DHCP (no PPPoE)

Own-router path
Own router connects directly
Physical handoff
Fibre ONT → Ethernet WAN
WAN connection
DHCP
VLAN
Confirm with provider
ISP phone / voice
Check with your provider
ISP TV
No dependency documented
Evidence confidence
High — official provider source

Settings to enter on your router

  1. Decline (or return) the rental router — Sonic lets you opt out and use your own.
  2. Connect your router's WAN port to the Ethernet jack/ONT installed by Sonic.
  3. Set the WAN connection type to DHCP / automatic IP; do not configure PPPoE.
  4. If the router gets no address after swapping devices, ask Sonic support to release the old DHCP lease.
WAN authDHCP / IPoE
VLANVaries — confirm for your line
Priority / PCP—
MTUDefault

What Sonic officially documents

Decline (or return) the rental router — Sonic lets you opt out and use your own. Connect your router's WAN port to the Ethernet jack/ONT installed by Sonic. Set the WAN connection type to DHCP / automatic IP; do not configure PPPoE. If the router gets no address after swapping devices, ask Sonic support to release the old DHCP lease.

Before you remove the Sonic box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. No TV dependency is documented. VLAN and MTU not stated. Sonic does not support configuration of third-party devices. IPv6 available (LA area still in progress); no static IPs on Gigabit Fiber. Phone service is VoIP and included on most plans — how it is delivered with an own router is not stated. Fiber FAQ updated 2026-06-29.

Common setup mistakes

Choose Dynamic IP / DHCP (IPoE), not PPPoE — there is no broadband login to enter. The VLAN depends on the access network behind your line — confirm it with the provider before configuring the router. Sonic states none of its services use PPPoE. Power-cycle the ONT or modem after swapping routers so it releases the old session.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.