HHLONIX
EN

United States · Ziply Fiber

Can I use my own router with Ziply Fiber?

Yes. Own router connects directly (medium-confidence evidence). Check phone and TV services before you remove the provider box.

Network equipment and server rack
Illustrative photograph; equipment and compatibility may differ.Shixart1985 · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

Ziply Fiber — own router on the ONT

Own-router path
Own router connects directly (medium-confidence evidence)
Physical handoff
Fibre ONT → Ethernet WAN
WAN connection
Not published — ask the provider
VLAN
Confirm with provider
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Choose a router whose WAN port matches your plan: at least 1 Gbps, 2.5 Gbps for 2 Gig, faster ports for 5 Gig and above.
  2. Connect the router's WAN port to the Ethernet port on the Ziply ONT.
  3. Update the router to the latest firmware before connecting — Ziply requires this for non-Ziply equipment.
  4. Connection type and VLAN are not stated by Ziply; confirm with Ziply support if the router does not get online.
Own-router pathOwn router connects directly (medium-confidence evidence)
WANNot published — ask the provider
PhoneCheck with your provider
TVCheck with your provider

What Ziply Fiber officially documents

Choose a router whose WAN port matches your plan: at least 1 Gbps, 2.5 Gbps for 2 Gig, faster ports for 5 Gig and above. Connect the router's WAN port to the Ethernet port on the Ziply ONT. Update the router to the latest firmware before connecting — Ziply requires this for non-Ziply equipment. Connection type and VLAN are not stated by Ziply; confirm with Ziply support if the router does not get online.

Before you remove the Ziply Fiber box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Official page lists hardware requirements only (Wi-Fi 6E minimum, Wi-Fi 7 recommended). DHCP/PPPoE, VLAN, MTU, IPv6 not stated. No date shown.

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.