HHLONIX
EN

United States · CenturyLink

Can I use my own router with CenturyLink?

Yes. Depends on line authentication and router. Check phone and TV services before you remove the provider box.

Network equipment and server rack
Illustrative photograph; equipment and compatibility may differ.Alan Levine · CC BY 2.0 · Wikimedia Commons
Page reviewed 6 November 2026Profile researched 6 November 2026Cited sources 1How Hlonix verifies →

Quick reference

Own-router settings at a glance

From official provider sources cited below. Pick your router for a full verdict with topology and caveats.

CenturyLink internet — third-party modem/router with VLAN 201

Own-router path
Depends on line authentication and router
Physical handoff
CenturyLink line → third-party modem/router (VLAN-tagged WAN)
WAN connection
Not published — ask the provider
VLAN
VLAN 201 (802.1Q tagged)
ISP phone / voice
Check with your provider
ISP TV
Check with your provider
Evidence confidence
Medium — verify account details

Settings to enter on your router

  1. Make sure your modem or router can tag WAN traffic with VLAN 201 — CenturyLink states this is mandatory for third-party equipment.
  2. Turn on VLAN tagging on the WAN/Internet interface and set the VLAN ID to 201.
  3. Contact CenturyLink chat/support to confirm compatibility and obtain the connection type and any login details for your account (not published on the page).
  4. Do not use a cable-company modem — CenturyLink says these will not work on its service.
Own-router pathDepends on line authentication and router
WANNot published — ask the provider
PhoneCheck with your provider
TVCheck with your provider

What CenturyLink officially documents

Make sure your modem or router can tag WAN traffic with VLAN 201 — CenturyLink states this is mandatory for third-party equipment. Turn on VLAN tagging on the WAN/Internet interface and set the VLAN ID to 201. Contact CenturyLink chat/support to confirm compatibility and obtain the connection type and any login details for your account (not published on the page). Do not use a cable-company modem — CenturyLink says these will not work on its service.

Before you remove the CenturyLink box

The official page does not settle phone service for a third-party router — confirm before you disconnect the provider box. TV services may use their own VLAN or box; check before swapping. Official page only gives VLAN 201; PPPoE/DHCP, MTU and credentials are not stated. No compatibility list; CenturyLink does not maintain firmware for non-CenturyLink modems. Page fetched via the espanol.centurylink.com mirror; no date shown. For Lumen/Quantum Fiber fiber areas see the Quantum Fiber profile.

Common setup mistakes

If the provider device must stay, put your own router behind it and avoid double NAT: use the provider's bridge, modem or passthrough option where one exists, otherwise run your router in access-point mode.

Next step

Evidence

Page reviewed 6 November 2026 · profile researched 6 November 2026.